Honeywell Technologies GLA Series Plunger Limit Switch, 1 NC/1 NO, IP67, Die Cast Zinc Housing, 600V ac, 6A

N° de stock RS:: 186-8188
Numéro d'article Distrelec:: 303-44-317
Référence fabricant:: GLAC01B
Fabricant:: Honeywell

Honeywell Technologies GLA Series Plunger Limit Switch, 1 NC/1 NO, IP67, Die Cast Zinc Housing, 600V ac, 6A

Sous-total (1 unité)*

241,65 €

(TVA exclue)

292,40 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 12 unité(s) expédiée(s) à partir du 12 octobre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	241,65 €

*Prix donné à titre indicatif

N° de stock RS:: 186-8188
Numéro d'article Distrelec:: 303-44-317
Référence fabricant:: GLAC01B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Limit Switch
	Actuator Type	Plunger
	Contact Configuration	1 NC/1 NO
	IP Rating	IP67
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	M20
	Series	GLA
	Switching DC Voltage	250V dc
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	600V ac
	Maximum Operating Temperature	85°C
	Standards/Approvals	UL, CSA, CE, CCC
	Length	145.8mm
	Width	42mm
	Depth	42mm
	Hazardous Area Certification	No
	Operating Force	16N
	Mechanical Life	15000000Operations
	Conduit Entry	20 mm

	Sélectionner tout
	Marque Honeywell
	Product Type Limit Switch
	Actuator Type Plunger
	Contact Configuration 1 NC/1 NO
	IP Rating IP67
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type M20
	Series GLA
	Switching DC Voltage 250V dc
	Minimum Operating Temperature -25°C
	Switching AC Voltage 600V ac
	Maximum Operating Temperature 85°C
	Standards/Approvals UL, CSA, CE, CCC
	Length 145.8mm
	Width 42mm
	Depth 42mm
	Hazardous Area Certification No
	Operating Force 16N
	Mechanical Life 15000000Operations
	Conduit Entry 20 mm

Pays d'origine :: GB

Honeywell GLA Series Limit Switch, 20mm Conduit Entry, IP67 - GLAC01B

This limit switch is a plunger-operated device designed for position sensing and circuit interruption in industrial control systems. It provides snap-action contacts for Rapid switching and is intended for use in automation, electrical and mechanical installations where a robust, sealed actuator is required.

Features and Benefits:

• IP67 rating ensures protection in wet and dusty environments
• Snap-action contacts deliver quick, reliable switching at load
• 600V AC switching capability supports high-voltage control circuits
• 6A current rating handles moderate control and signalling loads
• Operating temperature range down to -25°C and up to 85°C allows wide thermal use
• Mechanical endurance rated at 15,000,000 operations reduces maintenance frequency

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for machine tool limit sensing in metalworking facilities
• Used with motor starters for safety interlock feedback
• Can be used for position feedback in packaging equipment
• Suitable for gate and barrier open/close monitoring in access control

What conduit connection does it accept for wiring?

It accepts an M20 conduit entry to accommodate standard industrial cabling.

How are the electrical terminals configured?

Terminals provide a single normally closed and a single normally open contact for flexible control logic.

What material protects the housing against corrosion?

The enclosure is finished with an electrostatic epoxy-coated zinc treatment for enhanced surface protection.

Is it certified for recognised safety standards?

It carries approvals from UL, CSA, CE and CCC for international acceptance.

What actuation force is required to operate the plunger?

The plunger requires an operating force of 16 N to activate the switching mechanism.

Approvals

UL/ UL listed for Canada

Warning

GLA limit switches have not been designed as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of the products failing.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.