Honeywell GLA Series Plunger Limit Switch, DPDT, IP67, Die Cast Zinc Epoxy Coated Housing, 600V ac, 6A

N° de stock RS:: 311-2465
Numéro d'article Distrelec:: 303-44-316
Référence fabricant:: GLAB20B
Fabricant:: Honeywell

Honeywell GLA Series Plunger Limit Switch, DPDT, IP67, Die Cast Zinc Epoxy Coated Housing, 600V ac, 6A

Sous-total (1 unité)*

328,93 €

(TVA exclue)

398,01 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

16 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	328,93 €

*Prix donné à titre indicatif

N° de stock RS:: 311-2465
Numéro d'article Distrelec:: 303-44-316
Référence fabricant:: GLAB20B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Limit Switch
	Actuator Type	Plunger
	Contact Configuration	DPDT
	IP Rating	IP67
	Housing Material	Die Cast Zinc Epoxy Coated
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	Screw
	Series	GLA
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	600V ac
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	85°C
	Standards/Approvals	CCC, CE, CSA, UL
	Depth	42mm
	Length	145.8mm
	Width	42mm
	Hazardous Area Certification	No
	Operating Force	0.33Nm
	Conduit Entry	Threaded conduit
	Mechanical Life	15000000Cycles

	Sélectionner tout
	Marque Honeywell
	Product Type Limit Switch
	Actuator Type Plunger
	Contact Configuration DPDT
	IP Rating IP67
	Housing Material Die Cast Zinc Epoxy Coated
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type Screw
	Series GLA
	Minimum Operating Temperature -25°C
	Switching AC Voltage 600V ac
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 85°C
	Standards/Approvals CCC, CE, CSA, UL
	Depth 42mm
	Length 145.8mm
	Width 42mm
	Hazardous Area Certification No
	Operating Force 0.33Nm
	Conduit Entry Threaded conduit
	Mechanical Life 15000000Cycles

Pays d'origine :: GB

Honeywell GLA Series Limit Switch, 145.8mm Length, IP67 - GLAB20B

This limit switch is a mechanically actuated sensor designed to detect position changes within industrial systems and provide discrete electrical switching. It is built for use where a robust plunger actuator is required to convert mechanical motion into reliable snap‑action contact changes. The device is suited to installations demanding sealed enclosures and standard safety approvals in automation, electrical and mechanical environments.

Features and Benefits:

• DPDT snap‑action contacts deliver flexible circuit control
• Rated switching up to 600V AC and 250V DC for high‑voltage tasks
• Switching current capacity of 6A supports control and signalling loads
• Mechanical life of 15 million cycles minimises replacement frequency
• Operating range from −25 °C to 85 °C enables varied ambient use
• IP67 die‑cast zinc housing provides ingress protection and robustness

Applications

• Suitable for conveyor end‑of‑travel detection in manufacturing lines
• Ideal for actuating safety interlocks on industrial doors
• Used with motor control systems for limit position sensing
• Can be used for machine‑tool Axis homing and overtravel protection
• Suitable for heavy‑duty packaging equipment position monitoring

What type of actuator does it use and how does that affect contact operation?

It uses a plunger actuator which provides direct mechanical input to the snap‑action contacts, producing fast, repeatable switching for precise position detection.

How is the unit protected against dust and water ingress during washdown or outdoor use?

The enclosure meets IP67, indicating complete dust‑tight protection and temporary immersion resistance suitable for harsh environments.

Which approvals cover safety and conformity for industrial integration?

The device carries CCC, CE, CSA and UL listings, enabling compliance with a range of regional regulatory requirements.

How is electrical wiring accommodated on‑site?

A threaded conduit entry is provided to accept conduit fittings for secure cable routing and strain relief in industrial installations.

Approvals

UL/ UL listed for Canada

Warning

GLA limit switches have not been designed as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of the products failing.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.