Honeywell Technologies GLA Series Plunger Limit Switch, 1 NO/1 NC (SPDT), IP67, Die Cast Zinc Epoxy Coated Housing, 600V

N° de stock RS:: 311-2358
Numéro d'article Distrelec:: 301-38-712
Référence fabricant:: GLAB01B
Fabricant:: Honeywell Technologies

Honeywell Technologies GLA Series Plunger Limit Switch, 1 NO/1 NC (SPDT), IP67, Die Cast Zinc Epoxy Coated Housing, 600V

Sous-total (1 unité)*

217,10 €

(TVA exclue)

262,69 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 10 unité(s) expédiée(s) à partir du 28 décembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	217,10 €

*Prix donné à titre indicatif

N° de stock RS:: 311-2358
Numéro d'article Distrelec:: 301-38-712
Référence fabricant:: GLAB01B
Fabricant:: Honeywell Technologies

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell Technologies
	Actuator Type	Plunger
	Product Type	Limit Switch
	Contact Configuration	1 NO/1 NC (SPDT)
	IP Rating	IP67
	Housing Material	Die Cast Zinc Epoxy Coated
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	Screw
	Series	GLA
	Switching AC Voltage	600V ac
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	85°C
	Length	145.8mm
	Depth	42mm
	Width	42mm
	Standards/Approvals	UL, CSA, CE, CCC
	Hazardous Area Certification	No
	Operating Force	9.5N
	Mechanical Life	15000000Cycles

	Sélectionner tout
	Marque Honeywell Technologies
	Actuator Type Plunger
	Product Type Limit Switch
	Contact Configuration 1 NO/1 NC (SPDT)
	IP Rating IP67
	Housing Material Die Cast Zinc Epoxy Coated
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type Screw
	Series GLA
	Switching AC Voltage 600V ac
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 85°C
	Length 145.8mm
	Depth 42mm
	Width 42mm
	Standards/Approvals UL, CSA, CE, CCC
	Hazardous Area Certification No
	Operating Force 9.5N
	Mechanical Life 15000000Cycles

Pays d'origine :: GB

Honeywell GLA Series Limit Switch, 145.8mm Length, IP67 - GLAB01B

This limit switch is a plunger-operated device designed to detect mechanical position changes in industrial control systems. It provides a robust switching solution for automation, electrical and mechanical applications where a compact, enclosure-mounted actuator is required. The unit combines a snap-action contact mechanism with environmental protection and a temperature operating range suited to demanding site conditions.

Features and Benefits:

• Snap-action contact for fast, reliable state changes
• Single-pole double-throw contact reduces wiring complexity
• IP67 sealed housing for use in wet or dusty conditions
• Die-cast zinc case for strong impact resistance
• Rated for switching up to 600V and 6A for heavy electrical loads
• Mechanical endurance of 15 million cycles minimises replacement frequency

Applications

• Suitable for conveyor position sensing in manufacturing lines
• Ideal for limit detection on industrial valves and actuators
• Used with safety interlocks on machinery access panels
• Can be used for end-of-travel detection on material handling equipment

What actuator style does it use and how does that affect mounting?

It employs a plunger actuator which requires axial contact with the moving part and allows straightforward panel or bracket mounting where linear engagement is available.

How does the contact arrangement support control logic?

The single-pole double-throw configuration provides both normally open and normally closed outputs, enabling simple changeover or fail-safe wiring without additional switching devices.

Which environmental conditions can it withstand?

The enclosure meets IP67 protection, allowing temporary immersion and complete dust exclusion, so it performs in exposed, wash-down, or outdoor industrial environments.

What temperature extremes are acceptable for operation?

The unit operates reliably between -25 °C and 85 °C, covering typical cold storage and elevated ambient industrial conditions.

Approvals

UL/ UL listed for Canada

Warning

GLA limit switches have not been designed as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of the products failing.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.