Honeywell GLE Series Adjustable Roller Lever Limit Switch, 2 NO/2 NC, IP67, Die Cast Zinc Housing, 240V ac, 6A

N° de stock RS:: 223-3173
Numéro d'article Distrelec:: 301-38-764
Référence fabricant:: GLEB24A2B
Fabricant:: Honeywell

Honeywell GLE Series Adjustable Roller Lever Limit Switch, 2 NO/2 NC, IP67, Die Cast Zinc Housing, 240V ac, 6A

Sous-total (1 unité)*

250,07 €

(TVA exclue)

302,58 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

58 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 5 unité(s) expédiée(s) à partir du 24 août 2026
Plus 100 unité(s) expédiée(s) à partir du 05 octobre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	250,07 €

*Prix donné à titre indicatif

N° de stock RS:: 223-3173
Numéro d'article Distrelec:: 301-38-764
Référence fabricant:: GLEB24A2B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Product Type	Limit Switch
	Actuator Type	Adjustable Roller Lever
	IP Rating	IP67
	Contact Configuration	2 NO/2 NC
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	6A
	Series	GLE
	Minimum Operating Temperature	-40°C
	Switching DC Voltage	250V dc
	Switching AC Voltage	240V ac
	Maximum Operating Temperature	85°C
	Width	65mm
	Standards/Approvals	CCC, CE, CSA C22.2 No. 14, EN/IEC 60947-5-1, UL 508
	Length	139mm
	Depth	44.2mm
	Hazardous Area Certification	No
	Operating Force	0.165Nm
	Mechanical Life	10000000Cycles
	Conduit Entry	PG13.5
	Mounting Orientation	Side

	Sélectionner tout
	Marque Honeywell
	Product Type Limit Switch
	Actuator Type Adjustable Roller Lever
	IP Rating IP67
	Contact Configuration 2 NO/2 NC
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 6A
	Series GLE
	Minimum Operating Temperature -40°C
	Switching DC Voltage 250V dc
	Switching AC Voltage 240V ac
	Maximum Operating Temperature 85°C
	Width 65mm
	Standards/Approvals CCC, CE, CSA C22.2 No. 14, EN/IEC 60947-5-1, UL 508
	Length 139mm
	Depth 44.2mm
	Hazardous Area Certification No
	Operating Force 0.165Nm
	Mechanical Life 10000000Cycles
	Conduit Entry PG13.5
	Mounting Orientation Side

Pays d'origine :: GB

Honeywell GLE Series Limit Switch, 240V AC Switching Voltage, 6A Switching Current - GLEB24A2B

This limit switch is a rugged industrial actuator designed to detect and control mechanical motion in automation and electrical systems. It provides decisive snap-action switching for equipment control and is suited to demanding environments where reliable position sensing and secure electrical isolation are required.

Features and Benefits:

• Snap-action contacts deliver fast, consistent switching response
• Four-contact arrangement supports complex control logic
• IP67 ingress rating permits use in wet or dusty locations
• Electrostatic epoxy-coated zinc housing offers corrosion resistance
• Operates across a wide temperature range from -40°C to 85°C
• Mechanical endurance rated for 10,000,000 cycles for long service life

Applications

• Suitable for conveyor end-of-travel detection in factories
• Ideal for safety interlocks on industrial machinery
• Used with automated packaging lines for position feedback
• Can be used for limit detection in material handling systems

What conduit connection is provided for field wiring?

Field cable entry uses a PG13.5 threaded conduit Interface to accept compatible glands and maintain enclosure integrity.

How should the unit be mounted for correct actuation?

The device is designed for side mounting so the actuator lever aligns with the moving element for reliable engagement.

What are the electrical switching limits for control circuits?

It is rated to switch up to 240V AC and carry 6 A for AC loads and up to 250V DC for DC circuits within its contact ratings.

What contact behaviour can be expected under Rapid operation?

The switch uses snap-action contacts to provide Rapid transition between states, reducing arcing and improving repeatability during fast cycling.

Approvals

UL; CSA