Honeywell GLE Series Adjustable Roller Lever Limit Switch, 1 NC/1 NO, IP67, Die Cast Zinc Housing, 240V ac, 6A

N° de stock RS:: 186-8469
Numéro d'article Distrelec:: 301-38-760
Référence fabricant:: GLEB01A2B
Fabricant:: Honeywell

Honeywell GLE Series Adjustable Roller Lever Limit Switch, 1 NC/1 NO, IP67, Die Cast Zinc Housing, 240V ac, 6A

Sous-total (1 unité)*

199,90 €

(TVA exclue)

241,88 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

7 unité(s) prête(s) à être expédiée(s)
Plus 36 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 25 unité(s) expédiée(s) à partir du 02 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	199,90 €

*Prix donné à titre indicatif

N° de stock RS:: 186-8469
Numéro d'article Distrelec:: 301-38-760
Référence fabricant:: GLEB01A2B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Adjustable Roller Lever
	Product Type	Limit Switch
	Contact Configuration	1 NC/1 NO
	IP Rating	IP67
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	6A
	Series	GLE
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-40°C
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	85°C
	Length	139mm
	Depth	30mm
	Width	65mm
	Standards/Approvals	CSA, CCC, CE, UL
	Hazardous Area Certification	No
	Mechanical Life	10000000Cycles
	Mounting Orientation	Side
	Conduit Entry	PG13.5
	Operating Force	0.12N

	Sélectionner tout
	Marque Honeywell
	Actuator Type Adjustable Roller Lever
	Product Type Limit Switch
	Contact Configuration 1 NC/1 NO
	IP Rating IP67
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 6A
	Series GLE
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -40°C
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 85°C
	Length 139mm
	Depth 30mm
	Width 65mm
	Standards/Approvals CSA, CCC, CE, UL
	Hazardous Area Certification No
	Mechanical Life 10000000Cycles
	Mounting Orientation Side
	Conduit Entry PG13.5
	Operating Force 0.12N

Pays d'origine :: GB

Honeywell GLE Series Limit Switch, IP67, 6A Switching Current - GLEB01A2B

This limit switch is a rugged electromechanical device designed to detect position changes and actuate control circuits in industrial settings. It employs a roller-lever actuator to translate mechanical motion into electrical switching and is suited to applications where robust environmental protection and clear changeover signals are required.

Features and Benefits:

• IP67 rated enclosure keeps components sealed during washdown
• Snap-action contacts deliver fast switching for precise control
• Dual contact arrangement provides normally closed and normally open outputs
• Electrostatic epoxy-coated zinc housing resists harsh workplace conditions
• Operating range from -40 to 85°C supports extreme temperature environments
• Mechanical endurance of 10,000,000 cycles reduces replacement frequency

Applications

• Suitable for conveyor end-of-travel sensing in manufacturing lines
• Ideal for limit detection on automated material-handling equipment
• Used with safety interlocks on machine access panels
• Can be used for actuator position feedback in pneumatic systems

What electrical load can it switch for common control circuits?

It is rated to switch AC loads up to 240V AC at 6 A and DC loads up to 250V DC, suitable for many control and pilot circuits.

How is the device mounted and wired in constrained installations?

It is designed for side mounting and accepts cable entry via a PG13.5 conduit entry for straightforward conduit or gland connection.

Which contact behaviour ensures quick state changes under impact?

The snap-action contact mechanism produces Rapid contact transition for dependable signalling under dynamic conditions.

How does the construction contribute to long service life in industrial use?

The metal enclosure finished with an electrostatic epoxy coating and robust actuator components combine to deliver high mechanical life and durability under repeated operation.

Approvals

UL/ UL listed for Canada

Warning

GLE limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.