Telemecanique Sensors OsiSense ATEX D Standard format Series Roller Lever Limit Switch, 2 NO/2 NC, IP66, IP67, Zinc
- N° de stock RS:
- 221-2907
- Référence fabricant:
- XCMD4115L5EX
- Fabricant:
- Telemecanique Sensors
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 221-2907
- Référence fabricant:
- XCMD4115L5EX
- Fabricant:
- Telemecanique Sensors
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Telemecanique Sensors | |
| Actuator Type | Roller Lever | |
| Product Type | Limit Switch | |
| IP Rating | IP66, IP67 | |
| Contact Configuration | 2 NO/2 NC | |
| Housing Material | Zinc Alloy | |
| Contact Type | Snap Action | |
| Terminal Type | Cable | |
| Switching Current | 0.75A | |
| Series | OsiSense ATEX D Standard format | |
| Switching AC Voltage | 240V ac | |
| Switching DC Voltage | 250V dc | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 60°C | |
| Depth | 16mm | |
| Length | 65mm | |
| Standards/Approvals | EN/IEC 60079-0, 2014/34/EU - ATEX directive, EN/IEC 60079-31 | |
| Width | 30mm | |
| Hazardous Area Certification | ATEX, IECEx | |
| Mechanical Life | 10000000Cycles | |
| Mounting Orientation | Rotary | |
| Conduit Entry | M20 | |
| Sélectionner tout | ||
|---|---|---|
Marque Telemecanique Sensors | ||
Actuator Type Roller Lever | ||
Product Type Limit Switch | ||
IP Rating IP66, IP67 | ||
Contact Configuration 2 NO/2 NC | ||
Housing Material Zinc Alloy | ||
Contact Type Snap Action | ||
Terminal Type Cable | ||
Switching Current 0.75A | ||
Series OsiSense ATEX D Standard format | ||
Switching AC Voltage 240V ac | ||
Switching DC Voltage 250V dc | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 60°C | ||
Depth 16mm | ||
Length 65mm | ||
Standards/Approvals EN/IEC 60079-0, 2014/34/EU - ATEX directive, EN/IEC 60079-31 | ||
Width 30mm | ||
Hazardous Area Certification ATEX, IECEx | ||
Mechanical Life 10000000Cycles | ||
Mounting Orientation Rotary | ||
Conduit Entry M20 | ||
- Pays d'origine :
- FR
The Schneider Electric Limit switches are used in all automated installations and also in a wide variety of applications, due to the numerous advantages inherent to their technology .All limit switches incorporating either a slow break contact block or a snap action NC + NO (form Zb), NC + NO + NO, NC + NC + NO, NC + NC + NO + NO contact block are positive opening operation, in complete conformity with standard IEC 60947-5-1 Appendix K.
high repeat accuracy
high resistance to the different ambient conditions encountered in industry
high rated operational voltage
product certifications= UL, CSA, CCC
Liens connexes
- Telemecanique Sensors OsiSense ATEX D Standard format Series Roller Lever Limit Switch IP66 Zinc
- Telemecanique Sensors OsiSense ATEX D Series Roller Lever Limit Switch Zinc Alloy Housing 3A
- Telemecanique Sensors OsiSense ATEX D Series Roller Lever Limit Switch IP67 240V ac, 1.5A
- Telemecanique Sensors OsiSense ATEX D Series Roller Lever Limit Switch IP66 240V
- Telemecanique Sensors OsiSense ATEX D Series Roller Lever Limit Switch IP66 240V ac,
- Telemecanique Sensors OsiSense ATEX D Series Roller Lever Limit Switch IP66 Zinc Alloy Housing, 240V
- Telemecanique Sensors Special format Series Roller Lever Limit Switch Zinc Alloy Housing 3A
- Telemecanique Sensors OsiSense XC Series Roller Lever Limit Switch IP66 240V