Honeywell Technologies GLE Series Roller Plunger Limit Switch, 1 NC/1 NO, IP66, Die Cast Zinc Housing, 240V ac, 6A

N° de stock RS:: 186-8425
Numéro d'article Distrelec:: 301-38-761
Référence fabricant:: GLEB01C
Fabricant:: Honeywell

Honeywell Technologies GLE Series Roller Plunger Limit Switch, 1 NC/1 NO, IP66, Die Cast Zinc Housing, 240V ac, 6A

Sous-total (1 unité)*

173,29 €

(TVA exclue)

209,68 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

85 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	173,29 €

*Prix donné à titre indicatif

N° de stock RS:: 186-8425
Numéro d'article Distrelec:: 301-38-761
Référence fabricant:: GLEB01C
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Roller Plunger
	Product Type	Limit Switch
	IP Rating	IP66
	Contact Configuration	1 NC/1 NO
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	6A
	Series	GLE
	Switching AC Voltage	240V ac
	Minimum Operating Temperature	-40°C
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	85°C
	Depth	30mm
	Length	50mm
	Standards/Approvals	UL, CSA, CE, CCC
	Width	65mm
	Hazardous Area Certification	No
	Mechanical Life	10000000Cycles
	Operating Force	16N
	Conduit Entry	PG13.5
	Mounting Orientation	Side

	Sélectionner tout
	Marque Honeywell
	Actuator Type Roller Plunger
	Product Type Limit Switch
	IP Rating IP66
	Contact Configuration 1 NC/1 NO
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 6A
	Series GLE
	Switching AC Voltage 240V ac
	Minimum Operating Temperature -40°C
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 85°C
	Depth 30mm
	Length 50mm
	Standards/Approvals UL, CSA, CE, CCC
	Width 65mm
	Hazardous Area Certification No
	Mechanical Life 10000000Cycles
	Operating Force 16N
	Conduit Entry PG13.5
	Mounting Orientation Side

Se connecter pour voir les modèles CAO

Pays d'origine :: GB

Honeywell GLE Series Limit Switch, IP66, 16N Operating Force - GLEB01C

This limit switch is a roller-plunger actuated device designed to detect position and change electrical circuits within industrial control systems. It provides snap-action contact switching suitable for both AC and DC control circuits, housed in a robust enclosure for use where protection against ingress is required. The unit is intended for side mounting in machinery and plant installations operating across a broad temperature range.

Features and Benefits:

• Snap-action contacts deliver Rapid state change and reduced contact bounce
• 1NC and 1NO contact arrangement enables versatile control logic implementations
• IP66 enclosure prevents dust ingress and heavy water jets
• Electrostatic epoxy-coated zinc housing resists corrosive atmospheres
• Mechanical life rated at 10,000,000 cycles minimises maintenance frequency
• Operating force of 16 N ensures consistent actuation under load

Applications

• Suitable for detecting end-of-travel on conveyor indexing mechanisms
• Ideal for position feedback on industrial presses and stamping equipment
• Used with motor starters for overload or limit protection systems
• Can be used for safety interlocks on enclosed machinery doors
• Suitable for automated handling and material transfer stations

What electrical loads can it switch safely?

It is rated to switch AC loads up to 240V AC at 6 A and DC loads up to 250V DC at the same current rating, suitable for common control and signalling circuits.

How does the device cope with temperature extremes?

It is specified to operate from −40 °C up to 85 °C, allowing use in cold storage through to elevated ambient industrial environments.

What conduit size does it accept for cable entry?

The enclosure provides a PG13.5 conduit entry for secure routing of incoming wiring.

Are there orientation constraints for mounting?

It is designed for side mounting, which should be observed to ensure correct actuator alignment and operation.

What safety certifications are associated with the unit?

It holds approvals under UL, CSA, CE and CCC standards and is not certified for hazardous area installations.

Approvals

UL/ UL listed for Canada

Warning

GLE limit switches are not safety devices. They should be not used as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of product failure.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.