Honeywell Technologies GLA Series Roller Lever Limit Switch, 1 NC/1 NO, IP67, Die Cast Zinc Housing, 600V ac, 6A

N° de stock RS:: 186-8201
Numéro d'article Distrelec:: 136-30-805
Référence fabricant:: GLAC01A1B
Fabricant:: Honeywell

Honeywell Technologies GLA Series Roller Lever Limit Switch, 1 NC/1 NO, IP67, Die Cast Zinc Housing, 600V ac, 6A

Sous-total (1 unité)*

265,37 €

(TVA exclue)

321,10 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

6 unité(s) prête(s) à être expédiée(s)
Plus 108 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	265,37 €

*Prix donné à titre indicatif

N° de stock RS:: 186-8201
Numéro d'article Distrelec:: 136-30-805
Référence fabricant:: GLAC01A1B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	Contact Configuration	1 NC/1 NO
	IP Rating	IP67
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	M20
	Series	GLA
	Minimum Operating Temperature	-25°C
	Switching AC Voltage	600V ac
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	85°C
	Depth	42mm
	Length	145.8mm
	Standards/Approvals	UL, CSA, CE, CCC
	Width	42mm
	Hazardous Area Certification	No
	Mechanical Life	15000000Operations
	Conduit Entry	20 mm
	Mounting Orientation	Side
	Operating Force	0.33Nm

	Sélectionner tout
	Marque Honeywell
	Actuator Type Roller Lever
	Product Type Limit Switch
	Contact Configuration 1 NC/1 NO
	IP Rating IP67
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type M20
	Series GLA
	Minimum Operating Temperature -25°C
	Switching AC Voltage 600V ac
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 85°C
	Depth 42mm
	Length 145.8mm
	Standards/Approvals UL, CSA, CE, CCC
	Width 42mm
	Hazardous Area Certification No
	Mechanical Life 15000000Operations
	Conduit Entry 20 mm
	Mounting Orientation Side
	Operating Force 0.33Nm

Se connecter pour voir les modèles CAO

Pays d'origine :: GB

Honeywell GLA Series Limit Switch, 20mm Conduit Entry, 1 NC/1 NO Contact Configuration - GLAC01A1B

This limit switch is a Compact mechanical position sensor designed for industrial control and automation tasks where precise actuation is required. It operates via a roller lever actuator and provides snap-action electrical changeover contacts suitable for monitoring movement or end-of-travel positions in machinery and equipment. The unit is housed in an electrostatic epoxy-coated zinc enclosure and has ingress protection suitable for demanding work environments.

Features and Benefits:

• Snap-action contacts provide fast, reliable switching response
• 1NC and 1NO contact arrangement allows versatile circuit control
• Rated for 600V AC and 250V DC to handle varied supply voltages
• IP67 protection permits use in dusty and water-exposed locations
• Mechanical life of 15,000,000 operations supports long service cycles
• Operating range from -25 to 85°C maintains function across climates

Applications

• Suitable for conveyor end-of-travel detection in manufacturing lines
• Ideal for limit sensing on robotic pick-and-place assemblies
• Used with motor starters to detect shaft or cam position
• Can be used for safety interlocks on access panels and guards
• Suitable for automated packaging machinery position feedback

What conduit connection does it accept for cable entry?

The device uses an M20 Terminal entry to accommodate standard conduit fittings.

How is the actuator configured for side installation?

The roller lever is arranged for side mounting, allowing lateral actuation where space constraints exist.

What is the required actuation effort to operate the mechanism?

The actuator operates with an operating torque equivalent to 0.33 Nm, providing defined force for consistent actuation.

Which standards has the product been approved against?

It carries UL, CSA, CE and CCC approvals for use in applicable regulated installations.

Can it be used in certified hazardous-area installations?

It is not certified for hazardous-area classification and should not be specified where certified explosion protection is required.

Approvals

UL/ UL listed for Canada

Warning

GLA limit switches have not been designed as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of the products failing.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.