Honeywell Technologies GLA Series Roller Lever Limit Switch, 2 NC/2 NO, IP67, Die Cast Zinc Housing, 600V ac, 6A

N° de stock RS:: 186-8150
Numéro d'article Distrelec:: 303-96-614
Référence fabricant:: GLAC20A1B
Fabricant:: Honeywell

Honeywell Technologies GLA Series Roller Lever Limit Switch, 2 NC/2 NO, IP67, Die Cast Zinc Housing, 600V ac, 6A

Sous-total (1 unité)*

298,25 €

(TVA exclue)

360,88 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

2 unité(s) prête(s) à être expédiée(s)
Plus 106 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Plus 100 unité(s) expédiée(s) à partir du 16 novembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	298,25 €

*Prix donné à titre indicatif

N° de stock RS:: 186-8150
Numéro d'article Distrelec:: 303-96-614
Référence fabricant:: GLAC20A1B
Fabricant:: Honeywell

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Honeywell
	Actuator Type	Roller Lever
	Product Type	Limit Switch
	Contact Configuration	2 NC/2 NO
	IP Rating	IP67
	Housing Material	Die Cast Zinc
	Contact Type	Snap Action
	Switching Current	6A
	Terminal Type	M20
	Series	GLA
	Switching AC Voltage	600V ac
	Minimum Operating Temperature	-25°C
	Switching DC Voltage	250V dc
	Maximum Operating Temperature	85°C
	Width	42mm
	Depth	42mm
	Length	145.8mm
	Standards/Approvals	CCC, CE, CSA, UL
	Hazardous Area Certification	No
	Conduit Entry	20 mm
	Mounting Orientation	Side
	Operating Force	0.33Nm
	Mechanical Life	15000000Operations

	Sélectionner tout
	Marque Honeywell
	Actuator Type Roller Lever
	Product Type Limit Switch
	Contact Configuration 2 NC/2 NO
	IP Rating IP67
	Housing Material Die Cast Zinc
	Contact Type Snap Action
	Switching Current 6A
	Terminal Type M20
	Series GLA
	Switching AC Voltage 600V ac
	Minimum Operating Temperature -25°C
	Switching DC Voltage 250V dc
	Maximum Operating Temperature 85°C
	Width 42mm
	Depth 42mm
	Length 145.8mm
	Standards/Approvals CCC, CE, CSA, UL
	Hazardous Area Certification No
	Conduit Entry 20 mm
	Mounting Orientation Side
	Operating Force 0.33Nm
	Mechanical Life 15000000Operations

Se connecter pour voir les modèles CAO

Pays d'origine :: GB

Honeywell GLA Series Limit Switch, 20mm Conduit Entry, Roller Lever Actuator Type - GLAC20A1B

This limit switch is a rugged electromechanical device designed to detect position and actuate control circuits in industrial automation systems. It employs a roller lever actuator to convert mechanical movement into switching signals and is intended for side‑mounted installations where environmental sealing and Durable contacts are required.

Features and Benefits:

• IP67 sealed enclosure prevents ingress in harsh environments
• Snap‑action contacts deliver fast, positive switching response
• 2NC/2NO contact configuration enables flexible circuit layouts
• Rated for 600V AC and 6A to handle high‑voltage switching
• Electrostatic epoxy‑coated zinc housing resists corrosion and wear
• Mechanical endurance of 15,000,000 operations supports long duty cycles

Applications

• Suitable for conveyor end‑of‑travel detection in factories
• Ideal for machine‑tool limit sensing and safety interlocks
• Used with heavy‑duty actuators in packaging equipment
• Can be used for position feedback in material‑handling systems

What conduit connection does it accept for wiring?

It uses an M20 cable entry to accommodate standard industrial conduits and glands.

What temperature ranges can it operate within reliably?

It functions over an ambient range from −25°C up to a maximum of 85°C.

How is Terminal access arranged for mounting?

Termination is provided via the M20 entry with side‑orientated mounting to match panel or frame installations.

Which electrical switching regime is supported for DC applications?

It is specified to switch up to 250V DC for appropriate DC control circuits.

Approvals

UL/ UL listed for Canada

Warning

GLA limit switches have not been designed as emergency stop or safety devices. They must not be used in applications where personal injury could occur as a result of the products failing.

Standards

IEC/EN 60947-5-1
While IEC/EN 609747-1 covers general rules relating to low voltage switchgear and controlgear, IEC/EN 60947-5-1 specifically relates to control circuit devices and switching elements. The standard monitors the characteristics of devices, the electrical and mechanical requirements and the functional requirements.

EN50047
GLC and GLD limit switches are constructed from housing that meets EN50047. EN50047 applies to position switches with an automatic return actuator. Models that meet EN50047 feature standardised characteristics and dimensions (30.5 x 31.1 x 68 mm).

IP 66
A rating of IP 66 ensures that the limit switch units are protected against dust and low-pressure jets of water.

Sealed to NEMA 1, 4, 12, 13
NEMA 1 states that enclosures can be used indoor and offers a degree of protection against contact with the equipment enclosed.
NEMA 4 states that enclosures can be used either indoor or outdoor and provide protection against windblown rain and dust, hose directed water and splashing water.
NEMA 12 states that enclosures are intended for use indoors and offer some protection from dust, dirt, falling dirt and dripping non-corrosive liquids.
NEMA 13 states that enclosures are used indoors and offer a level of protection from oil, non-corrosive coolants, spraying water and dust.