BALLUFF R08 Series Capacitive Sensor Level Sensor, Flush, Housing Polypropylene
- N° de stock RS:
- 240-5363
- Référence fabricant:
- BCS008M
- Fabricant:
- BALLUFF
Sous-total (1 unité)*
160,71 €
(TVA exclue)
194,46 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 4 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 5 unité(s) expédiée(s) à partir du 29 septembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 160,71 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 240-5363
- Référence fabricant:
- BCS008M
- Fabricant:
- BALLUFF
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | BALLUFF | |
| Product Type | Level Sensor | |
| Device Type | Capacitive Sensor | |
| Mount Type | Flush | |
| Housing Material | Polypropylene | |
| Cable Length | 200mm | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | 70°C | |
| Interface Type | PNP | |
| Maximum DC Voltage | 30V dc | |
| Maximum Current | 50mA | |
| Standards/Approvals | CE cULus EAC WEEE | |
| Series | R08 | |
| Hazardous Area Certification | No | |
| Sélectionner tout | ||
|---|---|---|
Marque BALLUFF | ||
Product Type Level Sensor | ||
Device Type Capacitive Sensor | ||
Mount Type Flush | ||
Housing Material Polypropylene | ||
Cable Length 200mm | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature 70°C | ||
Interface Type PNP | ||
Maximum DC Voltage 30V dc | ||
Maximum Current 50mA | ||
Standards/Approvals CE cULus EAC WEEE | ||
Series R08 | ||
Hazardous Area Certification No | ||
- Pays d'origine :
- DE
The BALLUFF available in a wide range of versions, these sensors are suitable for a variety of applications. Choose from compact and flat cylindrical, cubic, or disc configurations, pressure-rated versions, and a variety of plug and cable variants. Equipped with our patented Smart Level technology, the capacitive sensors from Balluff compensate for moisture, foam, and adhesion of any kind – even through glass and plastic walls up to 10 mm thick.
Installation flush with container outer wall
Connection Cable with connector, M8x1-Male, 3-pin, 0.20 m, PUR
Switching output PNP normally open (NO)
Switching frequency 2 Hz
Liens connexes
- Carlo Gavazzi CD34CNFLFN Series Capacitive Sensor Level Sensor Housing Plastic
- BALLUFF BCS R08RRE-PSM80C-EP00 M8 x 1 PNP 50mA 30V 30 V dc
- BALLUFF BCS R08RR01-PSMFAC-EP02 Block Capacitive Proximity Sensor R08, M8 x 1 PNP 50mA 30V 250 V ac 30 V dc
- ifm electronic Capacitive Sensor Capacitive Proximity Sensor, Non-Flush
- BALLUFF BCS R08RR01-PSM80C-EP00 M8 x 1 PNP 50mA 30V 250 V ac 30 V dc
- ifm electronic LT8 Series Capacitive Level Sensor Thermoplastic Vulcanisate Fluorelastomer,
- ifm electronic LT8 Series Capacitive Level Sensor Polypropylene Polyamide, Polybutylene
- SICK LFC Series Capacitive Level Switch Level Sensor, Housing Stainless Steel