Endress+Hauser Liquicap T Series Capacitive Level Sensor Level Sensor, 22 mA, 30 V dc, 10 bar, 1.5 m, ATEX-Rated
- N° de stock RS:
- 317-758
- Numéro d'article Distrelec:
- 303-84-080
- Référence fabricant:
- FMI21-A1A1B2
- Fabricant:
- Endress+Hauser
Sous-total (1 unité)*
451,47 €
(TVA exclue)
546,28 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
Stocké-e par le fabricant
- Prêt à être expédié à partir du 26 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 451,47 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 317-758
- Numéro d'article Distrelec:
- 303-84-080
- Référence fabricant:
- FMI21-A1A1B2
- Fabricant:
- Endress+Hauser
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Endress+Hauser | |
| Product Type | Level Sensor | |
| Device Type | Capacitive Level Sensor | |
| Mount Type | Threaded Mount | |
| Probe Length | 1.5m | |
| Housing Material | Stainless Steel, Carbon Fibre | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 100°C | |
| Maximum DC Voltage | 30V dc | |
| Maximum Current | 22mA | |
| Maximum Pressure | 10bar | |
| Gasket Material | Ethylene Propylene Diene Monomer | |
| Standards/Approvals | CSA, CE, ATEX, 61010C-1, 2001, EN 61326, EN 50021, DIN EN 61010 Part 1 | |
| Series | Liquicap T | |
| Hazardous Area Certification | ATEX | |
| Sélectionner tout | ||
|---|---|---|
Marque Endress+Hauser | ||
Product Type Level Sensor | ||
Device Type Capacitive Level Sensor | ||
Mount Type Threaded Mount | ||
Probe Length 1.5m | ||
Housing Material Stainless Steel, Carbon Fibre | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 100°C | ||
Maximum DC Voltage 30V dc | ||
Maximum Current 22mA | ||
Maximum Pressure 10bar | ||
Gasket Material Ethylene Propylene Diene Monomer | ||
Standards/Approvals CSA, CE, ATEX, 61010C-1, 2001, EN 61326, EN 50021, DIN EN 61010 Part 1 | ||
Series Liquicap T | ||
Hazardous Area Certification ATEX | ||
- Pays d'origine :
- DE
The Endress+Hauser Liquicap T sensor is used in conductive liquids for continuous level measurement. Liquicap FMI21 is a simple and cost effective rod probe for continuous level measurement for conductive liquids. High quality non corrosive materials such as carbon fibre, stainless steel make it suitable even for aggressive liquids e.g. acids and alkalis.
Safe and reliable function regardless of tank geometry
No calibration necessary
High quality and non corrosive materials
No moving parts in tank
Cost effective solution for continuous level measurement
Optimized storage by simply shortening the probe rods on site
Liens connexes
- Endress+Hauser FMI21 Series Capacitive Level Sensor Level Sensor Ethylene Propylene Diene Monomer,
- Endress+Hauser FMI21 Series Capacitance Level Sensor ATEX-Rated, Housing Polybutylene Terephthalate
- Endress+Hauser FMI21 Series Capacitance Level Probe ATEX-Rated, Housing Polybutylene Terephthalate Fibre
- Endress+Hauser FTC260 Series Capacitive Level Capacitance ATEX-Rated, Housing Polybutylene Terephthalate
- Endress+Hauser FTC262 Series Capacitive Level Capacitance ATEX-Rated, Housing Polybutylene Terephthalate
- Endress+Hauser Micropilot FMR43 Series Radar Level Sensor Level Sensor ATEX-Rated, Housing
- Endress+Hauser FMR43 Series Radar Level Sensor Level Sensor ATEX-Rated, Housing Polytetrafluoroethylene
- Endress+Hauser Waterpilot FMX21 Series Hydrostatic Level Sensor Level Sensor ATEX-Rated