Infineon CDM10V4XTSA1 Lighting Controller, 25 V 110 μA 6-Pin SOT-23-6
- N° de stock RS:
- 258-0787
- Référence fabricant:
- CDM10V4XTSA1
- Fabricant:
- Infineon
Offre groupée disponible
Sous-total (1 paquet de 10 unités)*
3,31 €
(TVA exclue)
4,01 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 2 970 unité(s) expédiée(s) à partir du 02 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 10 - 90 | 0,331 € | 3,31 € |
| 100 - 240 | 0,314 € | 3,14 € |
| 250 - 490 | 0,308 € | 3,08 € |
| 500 - 990 | 0,288 € | 2,88 € |
| 1000 + | 0,265 € | 2,65 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 258-0787
- Référence fabricant:
- CDM10V4XTSA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Product Type | Lighting Controller | |
| Output Current | 110μA | |
| Input Voltage | 25 V | |
| Dimming Operation | 0 to 10 V | |
| Package Type | SOT-23-6 | |
| Number of Pins | 6 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 135°C | |
| Series | CDM10V-4 | |
| Standards/Approvals | JEDEC20/22 | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Product Type Lighting Controller | ||
Output Current 110μA | ||
Input Voltage 25 V | ||
Dimming Operation 0 to 10 V | ||
Package Type SOT-23-6 | ||
Number of Pins 6 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 135°C | ||
Series CDM10V-4 | ||
Standards/Approvals JEDEC20/22 | ||
Automotive Standard No | ||
The Infineon dimming solution is a fully integrated 0-10 V dimming interface IC and comes in a SOT-23-6 package to cover space requirements on small PCBs. The device is targeted for various dimming applications in lighting. The IC can be used to transmit analogue voltage based signals from a 0-10 V dimmer or potentiometer to the dimming or PWM input of a lighting controller IC in the form of a 5 mA current based PWM signal to drive an external opto-coupler. It replaces many components in a traditional solution and reduces BOM and PCB space significantly.
Simplest 0-10 V design on the market
2kHz PWM frequency
100μA Dimmer/Resistor Bias current
Wide input Vcc range from 11 to 25 V
Replaces many external components with a single chip reducing BOM and PCB space
Minimum variation from device to device
Liens connexes
- Infineon Lighting Controller, 25 V 110 μA 6-Pin SOT-23-6
- Infineon Lighting Controller, 25 V 5 mA 6-Pin SOT-23-6
- Infineon CDM10V2XTSA1 Lighting Controller, 25 V 5 mA 6-Pin SOT-23-6
- Infineon LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6
- Infineon LED Driver IC, 25 V 5 mA 6-Pin SOT-23-6
- Infineon CDM10VDXTSA1 LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6
- Infineon CDM10VD3XTSA1 LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6
- Infineon CDM10VXTSA1 LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6