Infineon CDM10VD2XTSA1 LED Driver IC, 25 V 5 mA 6-Pin SOT-23-6
- N° de stock RS:
- 219-5965
- Référence fabricant:
- CDM10VD2XTSA1
- Fabricant:
- Infineon
Offre groupée disponible
Sous-total (1 paquet de 15 unités)*
5,085 €
(TVA exclue)
6,15 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- Plus 2 880 unité(s) expédiée(s) à partir du 02 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le paquet* |
|---|---|---|
| 15 - 15 | 0,339 € | 5,09 € |
| 30 - 75 | 0,311 € | 4,67 € |
| 90 - 225 | 0,285 € | 4,28 € |
| 240 - 465 | 0,265 € | 3,98 € |
| 480 + | 0,259 € | 3,89 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 219-5965
- Référence fabricant:
- CDM10VD2XTSA1
- Fabricant:
- Infineon
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Infineon | |
| Output Current | 5mA | |
| Product Type | LED Driver IC | |
| Input Voltage | 25 V | |
| Input Voltage Type | DC | |
| Dimming Operation | PWM | |
| Maximum Output Power | 160mW | |
| Mount Type | Through Hole | |
| Package Type | SOT-23-6 | |
| Number of Pins | 6 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 135°C | |
| Height | 1.45mm | |
| Width | 1.6 mm | |
| Standards/Approvals | No | |
| Series | CDM10VD | |
| Length | 2.9mm | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Infineon | ||
Output Current 5mA | ||
Product Type LED Driver IC | ||
Input Voltage 25 V | ||
Input Voltage Type DC | ||
Dimming Operation PWM | ||
Maximum Output Power 160mW | ||
Mount Type Through Hole | ||
Package Type SOT-23-6 | ||
Number of Pins 6 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 135°C | ||
Height 1.45mm | ||
Width 1.6 mm | ||
Standards/Approvals No | ||
Series CDM10VD | ||
Length 2.9mm | ||
Automotive Standard No | ||
The Infineon CDM10V is a fully integrated 0-10V dimming interface IC and comes in a 6pin SOT package to cover space requirements on small PCBs. The device is targeted for various dimming applications in lighting. The IC can be used to transmit analog voltage based signals from a 0-10V dimmer or potentiometer to the dimming or PWM input of a lighting controller IC in the form of a current based PWM signal to drive an external optocoupler. CDM10V replaces many components in a traditional solution and reduces BOM and PCB space significantly. It supports active and passive dimming as well as dim-to-off with PWM input possibility. One solution for various applications. The one-time-programming interface allows a wide range of configurations.
Programmable
Wide input V cc range: 11 - 25V
Transparent PWM mode
Replaces many external components with single chip reducing BOM and PCB space
Minimum variation from device to device
Liens connexes
- Infineon LED Driver IC, 25 V 5 mA 6-Pin SOT-23-6
- Infineon LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6
- Infineon CDM10VDXTSA1 LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6
- Infineon CDM10VD3XTSA1 LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6
- Infineon CDM10VXTSA1 LED Driver IC, 25 V 1 mA 6-Pin SOT-23-6
- Infineon Lighting Controller, 25 V 5 mA 6-Pin SOT-23-6
- Infineon CDM10V2XTSA1 Lighting Controller, 25 V 5 mA 6-Pin SOT-23-6
- Infineon Lighting Controller, 25 V 110 μA 6-Pin SOT-23-6