Nexperia 74HC373D,653 8-Bit D Type Latch, Transparent, 3 State, 20-Pin SO
- N° de stock RS:
- 170-8000
- Référence fabricant:
- 74HC373D,653
- Fabricant:
- Nexperia
Sous-total (1 bobine de 2000 unités)*
500,00 €
(TVA exclue)
600,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 80,00 €
Temporairement en rupture de stock
- 4 000 unité(s) expédiée(s) à partir du 08 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 2000 + | 0,25 € | 500,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 170-8000
- Référence fabricant:
- 74HC373D,653
- Fabricant:
- Nexperia
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Nexperia | |
| Product Type | D Type Latch | |
| Logic Family | 74HC | |
| Latch Mode | Transparent | |
| Logic Function | D Type | |
| Number of Bits | 8 | |
| Number of Channels | 8 | |
| Output Type | 3 State | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Minimum Supply Voltage | 2V | |
| Package Type | SO | |
| Maximum Supply Voltage | 6V | |
| Pin Count | 20 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Width | 7.6 mm | |
| Length | 13mm | |
| Height | 2.45mm | |
| Standards/Approvals | No | |
| Series | 74HC | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Nexperia | ||
Product Type D Type Latch | ||
Logic Family 74HC | ||
Latch Mode Transparent | ||
Logic Function D Type | ||
Number of Bits 8 | ||
Number of Channels 8 | ||
Output Type 3 State | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Minimum Supply Voltage 2V | ||
Package Type SO | ||
Maximum Supply Voltage 6V | ||
Pin Count 20 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Width 7.6 mm | ||
Length 13mm | ||
Height 2.45mm | ||
Standards/Approvals No | ||
Series 74HC | ||
Automotive Standard No | ||
The 74HC373, 74HCT373 is an octal D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE.
Mixed 5 V and 3.3 V applications
Save board space
Low cost interface solutions
Improved signal integrity for complex layouts
Wide supply voltage range
Low propagation delay
Overvoltage tolerant
Source termination
Low input threshold
CMOS low power
Key applications
Memory controllers
Backplane interfaces
Liens connexes
- Nexperia 74HCT573D Transparent 20-Pin SO
- Nexperia 74HC573D Transparent 20-Pin SO
- Nexperia 74HC373D Transparent D Type 20-Pin SOIC
- Nexperia 8-Bit Octal D Type Latch 3 State, 20-Pin SO
- Nexperia 74HC259D Addressable 16-Pin SO
- Nexperia 74HC273D Addressable 20-Pin SO
- Nexperia 8-Bit 8 Bit Latch CMOS, 16-Pin SO
- Nexperia 8-Bit Latch 3 State, 20-Pin SOIC