Nexperia 74HCT373D,653 Octal D Type Latch, 8-Bit Non-Inverting, 20-Pin SO
- N° de stock RS:
- 170-5429
- Référence fabricant:
- 74HCT373D,653
- Fabricant:
- Nexperia
Offre groupée disponible
Sous-total (1 paquet de 25 unités)*
13,50 €
(TVA exclue)
16,25 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité | le paquet* |
|---|---|---|
| 25 - 100 | 0,54 € | 13,50 € |
| 125 - 475 | 0,335 € | 8,38 € |
| 500 - 1225 | 0,319 € | 7,98 € |
| 1250 + | 0,254 € | 6,35 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 170-5429
- Référence fabricant:
- 74HCT373D,653
- Fabricant:
- Nexperia
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Nexperia | |
| Product Type | Octal D Type Latch | |
| Logic Family | 74HCT | |
| Logic Function | D Type | |
| Number of Channels | 8 | |
| Polarity | Non-Inverting | |
| Mount Type | Surface | |
| Package Type | SO | |
| Pin Count | 20 | |
| Minimum Supply Voltage | 4.5V | |
| Input Level | TTL | |
| Maximum Supply Voltage | 5.5V | |
| Minimum Operating Temperature | -40°C | |
| Maximum Propagation Delay Time @ CL | 45ns | |
| Maximum Operating Temperature | 125°C | |
| Series | 74HCT | |
| Standards/Approvals | No | |
| Length | 13mm | |
| Height | 2.45mm | |
| Output Type | 3 State | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Nexperia | ||
Product Type Octal D Type Latch | ||
Logic Family 74HCT | ||
Logic Function D Type | ||
Number of Channels 8 | ||
Polarity Non-Inverting | ||
Mount Type Surface | ||
Package Type SO | ||
Pin Count 20 | ||
Minimum Supply Voltage 4.5V | ||
Input Level TTL | ||
Maximum Supply Voltage 5.5V | ||
Minimum Operating Temperature -40°C | ||
Maximum Propagation Delay Time @ CL 45ns | ||
Maximum Operating Temperature 125°C | ||
Series 74HCT | ||
Standards/Approvals No | ||
Length 13mm | ||
Height 2.45mm | ||
Output Type 3 State | ||
Automotive Standard No | ||
The 74HC373, 74HCT373 is an octal D-type transparent latch with 3-state outputs. The device features latch enable (LE) and output enable (OE) inputs. When LE is HIGH, data at the inputs enter the latches. In this condition the latches are transparent, a latch output will change each time its corresponding D-input changes. When LE is LOW the latches store the information that was present at the inputs a set-up time preceding the HIGH-to-LOW transition of LE.
Mixed 5 V and 3.3 V applications
Save board space
Low cost interface solutions
Improved signal integrity for complex layouts
Wide supply voltage range
Low propagation delay
Overvoltage tolerant
Source termination
Low input threshold
CMOS low power
Key applications
Memory controllers
Backplane interfaces
Liens connexes
- Nexperia Octal D Type Latch 20-Pin SO
- Nexperia 74HCT373D 8-Bit Non-Inverting, 20-Pin SO
- Nexperia 74HC573D Transparent 20-Pin SO
- Nexperia 74HC245D 8-Bit Non-Inverting 3 State, 20-Pin SO
- Nexperia 8-Bit Octal D Type Latch 3 State, 20-Pin SO
- Nexperia 74HCT259D,653 Latch
- Nexperia 74HC373D Transparent 20-Pin SO
- Nexperia 74HCT573D Transparent 20-Pin SO