Sefram MW9092 Continuity Tester, 50 V Min, 1000 V Max, 20 GΩ CAT IV
- N° de stock RS:
- 284-3007
- Numéro d'article Distrelec:
- 304-10-826
- Référence fabricant:
- MW9092
- Fabricant:
- Sefram
Sous-total (1 unité)*
407,02 €
(TVA exclue)
492,49 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 80,00 €
En stock
- Plus 5 unité(s) expédiée(s) à partir du 30 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 407,02 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 284-3007
- Numéro d'article Distrelec:
- 304-10-826
- Référence fabricant:
- MW9092
- Fabricant:
- Sefram
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Sefram | |
| Model Number | MW9092 | |
| Product Type | Insulation Tester | |
| Tester Type | Continuity Tester | |
| Minimum Test Voltage | 50V | |
| Maximum Test Voltage | 1000V | |
| Display Type | LCD Backlight | |
| Test Current | 200mA | |
| Power Source | Battery | |
| Battery Type | AA | |
| Insulation Testing Resistance | 20GΩ | |
| Minimum Operating Temperature | 0°C | |
| Safety Category Level | CAT IV | |
| Safety Category Voltage | 600V | |
| Maximum Operating Temperature | 40°C | |
| Height | 51mm | |
| Standards/Approvals | EN/IEC 61010 | |
| Length | 206mm | |
| Width | 90 mm | |
| Weight | 510g | |
| Sélectionner tout | ||
|---|---|---|
Marque Sefram | ||
Model Number MW9092 | ||
Product Type Insulation Tester | ||
Tester Type Continuity Tester | ||
Minimum Test Voltage 50V | ||
Maximum Test Voltage 1000V | ||
Display Type LCD Backlight | ||
Test Current 200mA | ||
Power Source Battery | ||
Battery Type AA | ||
Insulation Testing Resistance 20GΩ | ||
Minimum Operating Temperature 0°C | ||
Safety Category Level CAT IV | ||
Safety Category Voltage 600V | ||
Maximum Operating Temperature 40°C | ||
Height 51mm | ||
Standards/Approvals EN/IEC 61010 | ||
Length 206mm | ||
Width 90 mm | ||
Weight 510g | ||
- Pays d'origine :
- TW
The Sefram Insulation tester 50V, 100V, 250V, 500V, 1000V, continuity tester, multimeter 600V TRMS, a user-friendly and robust device designed for effortless detection of insulation defects in a variety of critical applications. This versatile tool is equipped to identify insulation issues in motor windings, electrical installation cables, generators, and more.
Test voltage of 50V, 100V, 250V, 500V, 1000V
Insulation resistance: up to 20Gohms
Measurement of Polarisation Index (PI) and Dielectric Absorption Ratio (DAR)
Measurement of TRMS AC voltages up to 600V DC
Continuity under 200mA
Low resistance measurement range with 0.01Ω
Resistance measurement up to 600 kΩ
Compact, robust and shockproof housing, with protective holster
LCD display with backlight
Compare function
5 x 100 memories available
Supplied with active test probe
Safety 600V CAT IV
Liens connexes
- Sefram SEFRAM62 690V dc CAT IV
- UNI-T UT505B Insulation Resistance Tester 200 GΩ CAT IV, CAT III
- Sefram SEFRAM62 690V dc CAT IV With RS Calibration
- Chauvin Arnoux CA 6528 Insulation & Continuity Tester 700 V Max, 9.99 GΩ CAT IV
- Extech MG320 Insulation Tester 1000 V Max, 20 GΩ CAT IV
- RS PRO IIT1500 Insulation Tester 1000 V Max, 200 GΩ CAT IV
- Chauvin Arnoux CA 6526 Insulation & Continuity Tester 1000 V Max CAT IV
- Chauvin Arnoux CA 6522 Insulation & Continuity Tester 1000 V Max CAT IV