Sefram MW9092 Insulation & Continuity Tester, 50 V Min, 1 kV Max, 20 GΩ CAT IV, RSCAL
- N° de stock RS:
- 886-481
- Référence fabricant:
- MW9092
- Fabricant:
- Sefram
Sous-total (1 unité)*
468,50 €
(TVA exclue)
566,88 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 8 unité(s) expédiée(s) à partir du 12 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 468,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 886-481
- Référence fabricant:
- MW9092
- Fabricant:
- Sefram
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Sefram | |
| Model Number | MW9092 | |
| Product Type | Insulation Tester | |
| Tester Type | Insulation & Continuity Tester | |
| Maximum Test Voltage | 1kV | |
| Minimum Test Voltage | 50V | |
| Display Type | LCD Backlight | |
| Test Current | 200mA | |
| Power Source | Battery | |
| Battery Type | AA | |
| Insulation Testing Resistance | 20GΩ | |
| Minimum Operating Temperature | 0°C | |
| Safety Category Level | CAT IV | |
| Safety Category Voltage | 600V | |
| Maximum Operating Temperature | 40°C | |
| Standards/Approvals | EN/IEC 61010 | |
| Width | 90mm | |
| Length | 206mm | |
| Height | 51mm | |
| Calibrated | RSCAL | |
| Weight | 510g | |
| Sélectionner tout | ||
|---|---|---|
Marque Sefram | ||
Model Number MW9092 | ||
Product Type Insulation Tester | ||
Tester Type Insulation & Continuity Tester | ||
Maximum Test Voltage 1kV | ||
Minimum Test Voltage 50V | ||
Display Type LCD Backlight | ||
Test Current 200mA | ||
Power Source Battery | ||
Battery Type AA | ||
Insulation Testing Resistance 20GΩ | ||
Minimum Operating Temperature 0°C | ||
Safety Category Level CAT IV | ||
Safety Category Voltage 600V | ||
Maximum Operating Temperature 40°C | ||
Standards/Approvals EN/IEC 61010 | ||
Width 90mm | ||
Length 206mm | ||
Height 51mm | ||
Calibrated RSCAL | ||
Weight 510g | ||
- Pays d'origine :
- TW
The Sefram Insulation tester 50V, 100V, 250V, 500V, 1000V, continuity tester, multimeter 600V TRMS, a user-friendly and robust device designed for effortless detection of insulation defects in a variety of critical applications. This versatile tool is equipped to identify insulation issues in motor windings, electrical installation cables, generators, and more.
Test voltage of 50V, 100V, 250V, 500V, 1000V
Insulation resistance: up to 20Gohms
Measurement of Polarisation Index (PI) and Dielectric Absorption Ratio (DAR)
Measurement of TRMS AC voltages up to 600V DC
Continuity under 200mA
Low resistance measurement range with 0.01Ω
Resistance measurement up to 600 kΩ
Compact, robust and shockproof housing, with protective holster
LCD display with backlight
Compare function
5 x 100 memories available
Supplied with Active test probe
Safety 600V CAT IV
Liens connexes
- Sefram MW9092 Insulation & Continuity Tester 1000 V Max, 20 GΩ CAT IV
- Sefram MW9092 Insulation & Continuity Tester 1000 V Max UKAS
- Chauvin Arnoux Insulation & Continuity Tester 100 V Max RSCAL
- Chauvin Arnoux Insulation & Continuity Tester 100 V Max RSCAL
- Chauvin Arnoux Insulation & Continuity Tester 500 V Max RSCAL
- Fluke 1507 Insulation & Continuity Tester 1000 V Max RSCAL
- Chauvin Arnoux CA 6524 Insulation & Continuity Tester 1000 V Max RSCAL
- Chauvin Arnoux CA 6526 Insulation & Continuity Tester 1000 V Max RSCAL