Fluke 789/771 GEAR Digital Multimeter, 0.4 V Min, 1000 V Max CAT III, CAT IV, RSCAL
- N° de stock RS:
- 458-155
- Référence fabricant:
- FLUKE-789/771 GEAR
- Fabricant:
- Fluke
Sous-total (1 unité)*
2 405,50 €
(TVA exclue)
2 910,66 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 2 unité(s) expédiée(s) à partir du 08 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 2 405,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 458-155
- Référence fabricant:
- FLUKE-789/771 GEAR
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Model Number | 789/771 GEAR | |
| Product Type | Insulation Tester | |
| Tester Type | Digital Multimeter | |
| Maximum Test Voltage | 1000V | |
| Minimum Test Voltage | 0.4V | |
| Display Type | Digital | |
| Test Current | 20mA | |
| Battery Type | Four AA alkaline | |
| Battery Life | 140h | |
| Power Source | Battery | |
| Minimum Operating Temperature | -20°C | |
| Maximum Operating Temperature | 55°C | |
| Safety Category Level | CAT III, CAT IV | |
| Safety Category Voltage | 1000, 600V | |
| Height | 50mm | |
| Length | 203mm | |
| Standards/Approvals | CAT IV 600 V/CAT III 1000 V, IEC610101, Pollution Degree 2/IEC610102033 | |
| Width | 100mm | |
| Weight | 600g | |
| Calibrated | RSCAL | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Model Number 789/771 GEAR | ||
Product Type Insulation Tester | ||
Tester Type Digital Multimeter | ||
Maximum Test Voltage 1000V | ||
Minimum Test Voltage 0.4V | ||
Display Type Digital | ||
Test Current 20mA | ||
Battery Type Four AA alkaline | ||
Battery Life 140h | ||
Power Source Battery | ||
Minimum Operating Temperature -20°C | ||
Maximum Operating Temperature 55°C | ||
Safety Category Level CAT III, CAT IV | ||
Safety Category Voltage 1000, 600V | ||
Height 50mm | ||
Length 203mm | ||
Standards/Approvals CAT IV 600 V/CAT III 1000 V, IEC610101, Pollution Degree 2/IEC610102033 | ||
Width 100mm | ||
Weight 600g | ||
Calibrated RSCAL | ||
- Pays d'origine :
- US
Fluke Insulation Tester, 1000V Maximum Test Voltage, 20mA Test Current - FLUKE-789/771 GEAR
This insulation tester is a combined digital multimeter and mA loop calibrator designed for industrial troubleshooting and calibration tasks. It measures voltages, currents, resistance and frequency while also sourcing and simulating mA loops and providing loop power where required, enabling field technicians in automation, electronics and electrical trades to perform single‑tool diagnostics and verification.
Features & Benefits
• 0.05% accuracy on 0–20.000mA supports precise loop calibration
• 24V loop power supply delivers greater than 24V into 250ohm for loop tests
• True‑rms voltage measurement to 1000V for accurate AC readings
• 20mA drive with 24mA over‑range handles high‑test‑current scenarios
• Simultaneous mA and per cent‑of‑scale readout simplifies interpretation
• Four AA alkaline cells provide up to 140h measurement runtime
• 24V loop power supply delivers greater than 24V into 250ohm for loop tests
• True‑rms voltage measurement to 1000V for accurate AC readings
• 20mA drive with 24mA over‑range handles high‑test‑current scenarios
• Simultaneous mA and per cent‑of‑scale readout simplifies interpretation
• Four AA alkaline cells provide up to 140h measurement runtime
**Applications**
• Suitable for commissioning current‑loop transmitters and valves
• Ideal for maintenance checks on industrial control panels
• Used for field calibration of sensors and 4–20mA loops
• Can be used for fault‑finding on motor control and PLC inputs
• Ideal for maintenance checks on industrial control panels
• Used for field calibration of sensors and 4–20mA loops
• Can be used for fault‑finding on motor control and PLC inputs
What environmental range can it operate within for on‑site use?
It functions between −20°C and 55°C and survives storage down to −40°C.
How much continuous current can it measure without overheating?
It measures up to 1.000A with 0.440A continuous capability for extended tasks.
What protections exist for high‑voltage industrial environments?
The instrument is safety rated to CAT III 1000V and CAT IV 600V and meets IEC 61010‑1 and IEC 61010‑2‑033 requirements.
How is battery replacement handled in the field?
The battery compartment is externally accessible for quick swap of the four AA cells.
What measurement modes assist in capturing transient behaviour?
Min/Max/Average/Hold and relative modes are provided along with fast and slow auto‑ramp for output profiling.
Liens connexes
- Fluke 789/771 GEAR Digital Multimeter 1000 V Max CAT III, CAT IV
- Fluke 789/771 GEAR Digital Multimeter 1000 V Max CAT III UKAS
- Fluke 1577 Insulation Multimeter 1000 V Max CAT IV
- Fluke 1577 Insulation Multimeter 1000 V Max CAT IV, RSCAL
- Fluke 1577 Insulation Multimeter 1000 V Max CAT IV, UKAS
- Fluke 1587 FC Insulation Multimeter 1000 V Max CAT III
- Fluke 1587 FC Insulation Multimeter 1000 V Max CAT III, UKAS
- Fluke 1587 FC Insulation Multimeter 1000 V Max CAT III, RSCAL