Fluke 1587FC/TPAK/C25 Insulation Multimeter, 50 V Min, 1000 V Max, 2 GΩ CAT III 1000 V, CAT IV 600 V
- N° de stock RS:
- 458-113
- Référence fabricant:
- FLK-1587FC/TPAK/C25
- Fabricant:
- Fluke
Sous-total (1 unité)*
1 018,00 €
(TVA exclue)
1 231,78 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 1 018,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 458-113
- Référence fabricant:
- FLK-1587FC/TPAK/C25
- Fabricant:
- Fluke
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Fluke | |
| Product Type | Insulation Tester | |
| Model Number | 1587FC/TPAK/C25 | |
| Tester Type | Insulation Multimeter | |
| Minimum Test Voltage | 50V | |
| Maximum Test Voltage | 1000V | |
| Display Type | Backlight | |
| Test Current | 1mA | |
| Power Source | Battery | |
| Battery Life | 1000h | |
| Battery Type | AA | |
| Minimum Operating Temperature | -20°C | |
| Insulation Testing Resistance | 2GΩ | |
| Safety Category Voltage | 1000, 600V | |
| Maximum Operating Temperature | 55°C | |
| Safety Category Level | CAT III 1000 V, CAT IV 600 V | |
| Height | 5cm | |
| Length | 2030000.00mm | |
| Width | 10cm | |
| Standards/Approvals | IEC 610102033, IEC 610101, IEC 60529: IP40, IEC 6132622, IEC 613261, CISPR 11 | |
| Weight | 550g | |
| Sélectionner tout | ||
|---|---|---|
Marque Fluke | ||
Product Type Insulation Tester | ||
Model Number 1587FC/TPAK/C25 | ||
Tester Type Insulation Multimeter | ||
Minimum Test Voltage 50V | ||
Maximum Test Voltage 1000V | ||
Display Type Backlight | ||
Test Current 1mA | ||
Power Source Battery | ||
Battery Life 1000h | ||
Battery Type AA | ||
Minimum Operating Temperature -20°C | ||
Insulation Testing Resistance 2GΩ | ||
Safety Category Voltage 1000, 600V | ||
Maximum Operating Temperature 55°C | ||
Safety Category Level CAT III 1000 V, CAT IV 600 V | ||
Height 5cm | ||
Length 2030000.00mm | ||
Width 10cm | ||
Standards/Approvals IEC 610102033, IEC 610101, IEC 60529: IP40, IEC 6132622, IEC 613261, CISPR 11 | ||
Weight 550g | ||
- Pays d'origine :
- US
Fluke Insulation Tester, 1000V Maximum Test Voltage, 2GΩ Insulation Testing Resistance - FLK-1587FC/TPAK/C25
This insulation tester is a handheld, battery-powered instrument that combines insulation resistance measurement with multimeter functions for field diagnostics and preventive maintenance in industrial environments. It is designed for use on live and de-energised equipment, providing insulation resistance up to very high values and selectable test voltages to assess insulation condition under controlled test currents. The unit is suited to technicians working on motors, drives and electrical systems where portable, rugged measurement capability is required.
Features & Benefits
• Insulation range to 2GΩ for detecting high-resistance faults
• Test voltages selectable up to 1000V for versatile inspections
• Nominal test current 1mA to exercise insulation without overload
• Live-circuit inhibit prevents testing if greater than 30V present for safety
• Backlit 6000-count display for clear readings in low light
• Operates on AA batteries delivering around 1000 h of meter use
• Test voltages selectable up to 1000V for versatile inspections
• Nominal test current 1mA to exercise insulation without overload
• Live-circuit inhibit prevents testing if greater than 30V present for safety
• Backlit 6000-count display for clear readings in low light
• Operates on AA batteries delivering around 1000 h of meter use
**Applications**
• Suitable for motor winding insulation assessment with VFDs
• Ideal for commissioning and preventive maintenance checks
• Used for troubleshooting insulation degradation on switchgear
• Can be used for asset baseline recording in industrial plants
• Suitable for on-site field testing of cables and installations
• Ideal for commissioning and preventive maintenance checks
• Used for troubleshooting insulation degradation on switchgear
• Can be used for asset baseline recording in industrial plants
• Suitable for on-site field testing of cables and installations
How does the instrument handle capacitive loads during insulation tests?
It is operable with capacitive loads up to 1 μF and auto-discharges capacitive voltage rapidly, with discharge time less than 0.5 s for C = 1 μF or less.
What environmental limits apply for onsite use?
The unit functions between -20 °C and 55 °C and can be stored between -40 °C and 60 °C
humidity limits vary with temperature up to 95% non‑condensing at 10 °C–30 °C.
What protection and safety categories does it meet?
It is rated for CAT III 1000V and CAT IV 600V measurement categories and meets IEC safety standards including IEC 61010 variants.
How is data handling supported for trend analysis and storage?
When used with compatible wireless tools and software it enables timed ratio tests, trend graphs, memory storage and temperature compensation via a measurements app.
What accessory options improve field usability?
Accessories include remote probe, test leads, crocodile clips, a magnetic hanger option and a soft case for site work.
Liens connexes
- Fluke 1587FC/TPAK/C25 Insulation Multimeter 1000 V Max CAT IV 600 V, RSCAL
- Fluke 1587FC/TPAK/C25 Insulation Multimeter 1000 V Max CAT IV 600 V, UKAS
- Fluke 179/TPAK/C25 Digital Multimeter 50 MΩ CAT III 1000 V, CAT IV 600 V
- Fluke 179/TPAK/C25 Digital Multimeter 50 MΩ CAT III 1000 V UKAS
- Fluke 179/TPAK/C25 Digital Multimeter 50 MΩ CAT III 1000 V RSCAL
- UNI-T UT505B Insulation Resistance Tester 200 GΩ CAT IV, CAT III
- Extech MG320 Insulation Tester 1000 V Max, 20 GΩ CAT IV
- Fluke 1587 FC Insulation Multimeter 1000 V Max CAT III