Références fabricant

Yamaichi 0.5 mm Pitch 100 Way QFP Surface Prototyping IC Socket

N° de stock RS:: 500-8015
Numéro d'article Distrelec:: 148-12-348
Référence fabricant:: IC149-100-025-B5
Fabricant:: Yamaichi

Yamaichi 0.5 mm Pitch 100 Way QFP Surface Prototyping IC Socket

Visuel non contractuel

Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.

N° de stock RS:: 500-8015
Numéro d'article Distrelec:: 148-12-348
Référence fabricant:: IC149-100-025-B5
Fabricant:: Yamaichi

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Yamaichi
	Product Type	IC Socket
	IC Socket Type	Prototyping Socket
	Package Type	QFP
	Number of Contacts	100
	Current	1A
	Number of Rows	2
	Pitch	0.5mm
	Voltage	700 V
	Orientation	Straight
	Contact Material	Copper Alloy
	Contact Plating	Gold
	Termination Type	Solder
	Socket Mount Type	Surface
	Device Mount Type	Surface
	Minimum Operating Temperature	-55°C
	Maximum Operating Temperature	170°C
	Standards/Approvals	No
	Housing Material	Polyphenylene Sulphide, Nylon

	Sélectionner tout
	Marque Yamaichi
	Product Type IC Socket
	IC Socket Type Prototyping Socket
	Package Type QFP
	Number of Contacts 100
	Current 1A
	Number of Rows 2
	Pitch 0.5mm
	Voltage 700 V
	Orientation Straight
	Contact Material Copper Alloy
	Contact Plating Gold
	Termination Type Solder
	Socket Mount Type Surface
	Device Mount Type Surface
	Minimum Operating Temperature -55°C
	Maximum Operating Temperature 170°C
	Standards/Approvals No
	Housing Material Polyphenylene Sulphide, Nylon

SMT Prototyping Socket Datasheet

Statut RoHS : Exempté

Pays d'origine :: JP

Prototyping QFP Sockets

This QFP socket has been designed for late prototyping or early production applications, allowing up to 20 insertion cycles of the device without risk of contact degradation or lead damage. The footprint of the socket mirrors that of the device, enabling the socket to be dispensed with favour of direct soldering, without any further changes to the PCB design. Insulator is high temperature thermoplastic. Contacts are copper alloy with tin over nickel plating

Contact resistance 30mΩ (at 10mA)

Current rated 500mA per contact

Flammability UL 94 V-0

Operating temperature -25C to +85C

Temperature for reflow soldering 220C for 60 seconds

Insulation resistance 500mΩ (at 150Vdc)

Surface Mount

Yamaichi 0.5 mm Pitch 100 Way QFP Surface Prototyping IC Socket

Prototyping QFP Sockets

Liens connexes