Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure, IP54 31 mm, 111 mm, 60 mm
- N° de stock RS:
- 343-9883
- Numéro d'article Distrelec:
- 150-05-525
- Référence fabricant:
- 27134PSLA
- Fabricant:
- Hammond
Sous-total (1 unité)*
7,03 €
(TVA exclue)
8,51 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 142 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 7,03 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 343-9883
- Numéro d'article Distrelec:
- 150-05-525
- Référence fabricant:
- 27134PSLA
- Fabricant:
- Hammond
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Hammond | |
| Product Type | Enclosure | |
| Body Material | Die Cast Aluminium | |
| External Height | 31mm | |
| External Length | 111mm | |
| Ventilated | No | |
| External Width | 60mm | |
| IP Rating | IP54 | |
| Colour | Natural | |
| Lid Colour | Natural | |
| Flanged | No | |
| Shielding | Shielded | |
| Hazardous Area Certification | No | |
| Series | Eddystone | |
| Number of Knockouts | 0 | |
| Standards/Approvals | RoHS | |
| Weight | 140g | |
| Transparent Door | No | |
| Explosion Proof | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Hammond | ||
Product Type Enclosure | ||
Body Material Die Cast Aluminium | ||
External Height 31mm | ||
External Length 111mm | ||
Ventilated No | ||
External Width 60mm | ||
IP Rating IP54 | ||
Colour Natural | ||
Lid Colour Natural | ||
Flanged No | ||
Shielding Shielded | ||
Hazardous Area Certification No | ||
Series Eddystone | ||
Number of Knockouts 0 | ||
Standards/Approvals RoHS | ||
Weight 140g | ||
Transparent Door No | ||
Explosion Proof No | ||
- Pays d'origine :
- TW
Hammond Enclosure, 111 (L) x 60 (W) x 31mm (H), Die-Cast Aluminium Construction, Natural Colour - Eddystone Series - 27134PSLA
Is exposure gnawing away at the reliable performance of your circuits? Reach for this impact-resistant enclosure from Hammond to shield your electronics against the daily grind. By protecting your equipment, the unit helps ensure consistent operation and an extended lifespan. It's made of robust aluminium, so stands up to corrosion and is safe to install in humid environments. Thanks to lap-joint assembly, you get IP54 protection to curb the entry of dust and achieve a frictionless safe house. This construction also withstands water sprays from all directions, meaning you can wash the box down if your work calls for a hygienic setting.
Features & Benefits
• EMC unit for effective performance without affecting other devices
• Stainless steel cover screws included to save time and effort
• Low side wall draft angle allows for easy PCB mounting
Applications
• Electronic circuits
• Industrial control devices
• Medical applications
• Power installations
• Electrical engineering
How do I know the screws won't snag on my components when I fit the lid?
Countersunk lid holes encase the screws so there's no contact between the fasteners and circuit components. This also helps with aligning and securing the lid during installation.
Liens connexes
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 92 mm, 38 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 53 mm, 38 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 125 mm, 125 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 119 mm, 94 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 145 mm, 95 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 188 mm, 120 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 120 mm, 95 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 188 mm, 120 mm