Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure, IP54, 31 mm x 92 mm x 38 mm
- N° de stock RS:
- 343-9877
- Numéro d'article Distrelec:
- 150-05-517
- Référence fabricant:
- 27969PSLA
- Fabricant:
- Hammond
Sous-total (1 unité)*
5,85 €
(TVA exclue)
7,08 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 518 unité(s) prête(s) à être expédiée(s)
- Plus 217 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 5,85 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 343-9877
- Numéro d'article Distrelec:
- 150-05-517
- Référence fabricant:
- 27969PSLA
- Fabricant:
- Hammond
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Hammond | |
| Product Type | Enclosure | |
| Body Material | Die Cast Aluminium | |
| External Height | 31mm | |
| External Width | 38mm | |
| Ventilated | No | |
| External Length | 92mm | |
| IP Rating | IP54 | |
| Lid Colour | Natural | |
| Colour | Natural | |
| Flanged | No | |
| Hazardous Area Certification | No | |
| Shielding | Shielded | |
| Series | Eddystone | |
| Number of Knockouts | 0 | |
| Standards/Approvals | RoHS | |
| Weight | 80g | |
| Transparent Door | No | |
| Explosion Proof | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Hammond | ||
Product Type Enclosure | ||
Body Material Die Cast Aluminium | ||
External Height 31mm | ||
External Width 38mm | ||
Ventilated No | ||
External Length 92mm | ||
IP Rating IP54 | ||
Lid Colour Natural | ||
Colour Natural | ||
Flanged No | ||
Hazardous Area Certification No | ||
Shielding Shielded | ||
Series Eddystone | ||
Number of Knockouts 0 | ||
Standards/Approvals RoHS | ||
Weight 80g | ||
Transparent Door No | ||
Explosion Proof No | ||
Hammond Enclosure, 91 (L) x 38 (W) x 31mm (H), 80g Weight, Shielded - Eddystone Series - 27969PSLA
Looking for a handy all-rounder to make storing PCBs a walk in the park? Choose this enclosure from Hammond. It comfortably houses PC boards as large as 78.61 (L) x 28.12mm (W) to protect your sensitive circuits from harm. The rugged die-cast aluminium alloy body can be machined easily to add the cable ports needed by your setup. Thanks to lap-joint construction, the cover and chassis fit together precisely to close securely and seal out debris.
Features & Benefits
• Countersunk holes keep screws flush against the exterior to prevent snags
• IP54-rated, meaning it's dust-resistant and protected against water splashes
• Low side wall draft angle of 2° or less makes it easy to insert and remove PC boards
Applications
• Data centres
• Telecommunications networks
• Electronic device design
What are the benefits of a shielded enclosure?
Shielded enclosures like this one are on hand to stop EMI and RFI – which could corrupt data and signals – from disrupting your PCBs. Protecting your PC cards from such interference is essential when storing or using them near computer equipment.
Liens connexes
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 111 mm, 60 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 53 mm, 38 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 145 mm, 95 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 120 mm, 95 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 188 mm, 120 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 119 mm, 94 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 188 mm, 120 mm
- Hammond Eddystone Series Natural Natural Lid Die Cast Aluminium Enclosure 125 mm, 125 mm