Microchip KSZ8851-16MLLI, Ethernet Controller, 3.3 V 100 Mbps BIU, 48-Pin 3.3V LQFP
- N° de stock RS:
- 177-3534
- Référence fabricant:
- KSZ8851-16MLLI
- Fabricant:
- Microchip
Sous-total (1 plateau de 250 unités)*
1 308,50 €
(TVA exclue)
1 583,25 €
(TVA incluse)
Informations sur le stock actuellement non accessibles - Veuillez vérifier plus tard
Unité | Prix par unité | le plateau* |
|---|---|---|
| 250 + | 5,234 € | 1 308,50 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 177-3534
- Référence fabricant:
- KSZ8851-16MLLI
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Maximum Data Rate | 100Mbps | |
| Product Type | Ethernet Controller | |
| Communication Mode | Full Duplex/Half Duplex | |
| Loopback Mode | Internal | |
| Interface Type | BIU | |
| Standard Supported | IEEE 802.3u, IEEE | |
| Mount Type | Surface | |
| Package Type | LQFP | |
| Pin Count | 48 | |
| Maximum Supply Voltage | 3.3V | |
| Minimum Operating Temperature | 85°C | |
| Maximum Operating Temperature | -40°C | |
| Standards/Approvals | No | |
| Height | 1.6mm | |
| Length | 7.1mm | |
| Minimum Supply Voltage | 3.3V | |
| Supply Current | 85mA | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Maximum Data Rate 100Mbps | ||
Product Type Ethernet Controller | ||
Communication Mode Full Duplex/Half Duplex | ||
Loopback Mode Internal | ||
Interface Type BIU | ||
Standard Supported IEEE 802.3u, IEEE | ||
Mount Type Surface | ||
Package Type LQFP | ||
Pin Count 48 | ||
Maximum Supply Voltage 3.3V | ||
Minimum Operating Temperature 85°C | ||
Maximum Operating Temperature -40°C | ||
Standards/Approvals No | ||
Height 1.6mm | ||
Length 7.1mm | ||
Minimum Supply Voltage 3.3V | ||
Supply Current 85mA | ||
Automotive Standard No | ||
- Pays d'origine :
- US
The KSZ8851 is a single-port controller chip with a SPI or 8-/16-/32-bit non-PCI CPU interface. Available in 32-/48-/128-pin packages, the KSZ8851 is for applications requiring cost-effective, high-throughput Ethernet connectivity in traditional embedded systems with MCUs or MPUs.
Integrated MAC and PHY Ethernet Controller
Designed for high performance and high throughput applications
Supports 10BASE-T/100BASE-TX
Supports full-duplex flow control and half-duplex back pressure collision flow control
Supports DMA-slave burst data read and write transfers
Supports IP Header (IPv4)/TCP/UDP/ICMP checksum generation and checking
Supports IPv6 TCP/UDP/ICMP checksum generation and checking
Automatic 32-bit CRC generation and checking
Simple SRAM-like host interface easily connects to most common embedded MCUs.
Supports multiple data frames for transmit and receive without address bus and byte-enable signals
Supports both Big- and Little-Endian processors
Liens connexes
- Microchip KSZ8851-16MLLI 3.3 V 100 Mbps BIU, 48-Pin 3.3V LQFP
- Microchip 3.3 V 100 Mbps, 48-Pin 3.3V LQFP
- Microchip KSZ8081MLXIA-TR 3.3 V 100 Mbps, 48-Pin 3.3V LQFP
- Microchip KSZ8863FLLI 3.3 V 100 Mbps, 48-Pin 3.3V LQFP
- Microchip KSZ8081MLXIA 3.3 V 100 Mbps RMII v1.2, 48-Pin 3.3V LQFP
- Texas Instruments DP83848CVVX/NOPB 3.3 V 100 Mbps RMII, 48-Pin 3.3V LQFP
- Texas Instruments DP83640TVV/NOPB 3.3 V 100 Mbps RMII, 48-Pin 3.3V LQFP
- Texas Instruments DP83848IVV/NOPB 3.3 V 100 Mbps RMII, 48-Pin 3.3V LQFP