Microchip KSZ8081RNDIA-TR, Ethernet Transceiver, 100Mbps RMII, 1.2 V, 48-Pin LQFP
- N° de stock RS:
- 333-194
- Référence fabricant:
- KSZ8081RNDIA-TR
- Fabricant:
- Microchip
Sous-total (1 bobine de 1000 unités)*
1 132,00 €
(TVA exclue)
1 370,00 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Nouveau produit - précommandez dès aujourd'hui
- Expédition à partir du 06 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | la bobine* |
|---|---|---|
| 1000 + | 1,132 € | 1 132,00 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 333-194
- Référence fabricant:
- KSZ8081RNDIA-TR
- Fabricant:
- Microchip
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Microchip | |
| Physical Network Type | IEEE802.3 | |
| IC Type | USB Controller IC | |
| Network Interface | RMII | |
| Communication Mode | Full Duplex, Half Duplex | |
| Data Rate | 100Mbps | |
| Package Type | LQFP | |
| Pin Count | 48 | |
| Typical Operating Supply Voltage | 1.2 V | |
| Sélectionner tout | ||
|---|---|---|
Marque Microchip | ||
Physical Network Type IEEE802.3 | ||
IC Type USB Controller IC | ||
Network Interface RMII | ||
Communication Mode Full Duplex, Half Duplex | ||
Data Rate 100Mbps | ||
Package Type LQFP | ||
Pin Count 48 | ||
Typical Operating Supply Voltage 1.2 V | ||
The Microchip 10/100 BASE TX Ethernet physical layer transceiver for transmission and reception of data over standard CAT 5 unshielded twisted pair cable.
It is a highly integrated, compact solution. It reduces board cost and simplifies board layout by using on chip termination resistors for the differential pairs, by integrating a low noise regulator to supply the 1.2V core.
It is a highly integrated, compact solution. It reduces board cost and simplifies board layout by using on chip termination resistors for the differential pairs, by integrating a low noise regulator to supply the 1.2V core.
LED outputs for link and activity status indication
On chip termination resistors for the differential pairs
Baseline wander correction
On chip termination resistors for the differential pairs
Baseline wander correction
Liens connexes
- Microchip LAN8720AI-CP-TR-ABC 100Mbps RMII 24-Pin QFN
- Microchip LAN9646T-I/MXX 100Mbps MII RMII 1.2 V, 132-Pin DVQFN
- Microchip KSZ8091RNBIA-TR 100Mbps 1.2 V, 32-Pin VQFN
- Microchip LAN9513-JZX-TR 100Mbps 1.2 V, 64-Pin QFN
- Microchip LAN8742A-CZ 100Mbps RMII 24-Pin QFN
- Microchip KSZ8873RLLI 10/100Mbps RMII 64-Pin LQFP
- Microchip LAN8720A-CP-ABC 100Mbps RMII 24-Pin QFN
- Microchip LAN8710AI-EZK 100Mbps MII 3.3 V, 32-Pin VQFN
