Belden, 500 m Cat6 Cat6 Cable, Grey Straight to Unterminated Polyvinyl Chloride Sheath, SF/UTP

Voir l’ensemble des Ethernet Cable

Sous-total (1 bobine de 500 mètres)*

1 377,42 €

(TVA exclue)

1 666,68 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Temporairement en rupture de stock
  • 1 unité(s) expédiée(s) à partir du 30 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Bobine(s)
la bobine
le mètre*
1 +1 377,42 €2,755 €

*Prix donné à titre indicatif

N° de stock RS:
631-700
Référence fabricant:
7860ES.00500
Fabricant:
Belden
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Belden

Product Type

Cat6 Cable

Cable Length

500m

LAN Category

Cat6

Shield Type

SF/UTP

Connector Type A

Straight

Connector Type B

Unterminated

Jacket Material

Polyvinyl Chloride

Jacket Colour

Grey

Standards/Approvals

IEC 62821, EU, ISO/IEC 11801-1, CE

Voltage

72V

Series

7860ES

Pays d'origine :
HU

Belden Power Cable Assembly, 500m Cable Length, Grey Jacket - 7860ES.00500


This power cable assembly is designed to deliver low-voltage electrical power over extended lengths for industrial and automation systems. It combines a robust polymer outer layer with a shielded conductors arrangement to support installations where long, continuous cable runs are required. The assembly is provided with a straight factory-fitted connector at one end and leaves the other end unterminated for on-site termination and customisation.

Features and Benefits:


• 72V rating supporting low-voltage industrial installations
• 500m single-reel length reducing joint requirements
• SF/UTP shielding limiting electromagnetic interference
• Polyvinyl chloride jacket providing mechanical and chemical resistance
• Grey jacket colour aiding Visual identification in cable trays

Applications


• Suitable for long-distance power distribution in automation systems
• Ideal for integration into factory control cabinet wiring
• Used with drive and motor assemblies requiring field termination
• Can be used for extended plant-floor power runs in manufacturing

How is the cable end prepared for connection on site?


The unterminated end is supplied with conductors exposed for custom termination, allowing soldering, crimping, or fitting of site-specific connectors according to installer preference.

What approvals and standards relate to this cable’s design?


It meets IEC 62821 and ISO/IEC 11801‑1 standards and carries CE marking to indicate conformity with relevant EU directives.

What connector arrangement is provided for quick integration?


One end is fitted with a straight connector to permit immediate connection to compatible equipment while the opposite end remains available for bespoke termination.

Which environments is the jacket formulation suited to?


The PVC outer sheath is selected for general industrial use where resistance to abrasion and common chemical exposure is required.

Liens connexes