KEMET USEQGCDAC8N100 Carbon Monoxide Air Quality Sensor
- N° de stock RS:
- 206-6602
- Référence fabricant:
- USEQGCDAC8N100
- Fabricant:
- KEMET
Offre groupée disponible
Sous-total (1 tube de 50 unités)*
2 869,35 €
(TVA exclue)
3 471,90 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
Temporairement en rupture de stock
- Expédition à partir du 03 juillet 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité | le tube* |
|---|---|---|
| 50 - 50 | 57,387 € | 2 869,35 € |
| 100 + | 55,091 € | 2 754,55 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 206-6602
- Référence fabricant:
- USEQGCDAC8N100
- Fabricant:
- KEMET
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | KEMET | |
| Product Type | Air Quality Sensor | |
| Gases Detected | Carbon Monoxide | |
| Response Time | 12ms | |
| Sub Type | Gas Sensor | |
| Minimum Supply Voltage | 2.7V | |
| Power Source | Mains | |
| Maximum Supply Voltage | 8V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 85°C | |
| Package Type | TO-39 | |
| Width | 9.14 mm | |
| Length | 16.5mm | |
| Height | 9.14mm | |
| Standards/Approvals | No | |
| Series | QGC | |
| Weight | 0.97g | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque KEMET | ||
Product Type Air Quality Sensor | ||
Gases Detected Carbon Monoxide | ||
Response Time 12ms | ||
Sub Type Gas Sensor | ||
Minimum Supply Voltage 2.7V | ||
Power Source Mains | ||
Maximum Supply Voltage 8V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 85°C | ||
Package Type TO-39 | ||
Width 9.14 mm | ||
Length 16.5mm | ||
Height 9.14mm | ||
Standards/Approvals No | ||
Series QGC | ||
Weight 0.97g | ||
Automotive Standard No | ||
- Pays d'origine :
- MY
The KEMET QGC thin film pyroelectric gas sensors have reduced physical size but still provide high sensitivity with fast frequency operation. It employs a highly stable dual sensor in a TO39 package. It also has an internal CMOS operational amplifier with a 10 GO feedback resistor outputting a voltage signal centred around half the supply rail.
Reliable operation over a wide frequency range
Low noise circuit
Analogue output
Liens connexes
- KEMET USEQGCDAC8N100, Carbon Monoxide Air Quality Sensor
- KEMET USEQGCDAC8L100, Carbon Monoxide Air Quality Sensor
- Figaro FECS40-1000, Carbon Monoxide Air Quality Sensor
- Figaro TGS5042-A00, Carbon Monoxide Air Quality Sensor
- Figaro TGS3870-B00 Methane Air Quality Sensor for Combination Methane & Carbon Monoxide Detectors
- Sensirion SCD41-D-R1, Carbon Monoxide Gas Sensor IC for Air Quality Monitors
- Sensirion SCD40-D-R1, Carbon Monoxide Gas Sensor IC for Air Quality Monitors
- KEMET USEQGCDAC82S00, Carbon Dioxide Air Quality Sensor
