Figaro TGS5042-A00 Carbon Monoxide Air Quality Sensor for Co Monitor, Fire Detection, Residential, Ventilation,
- N° de stock RS:
- 134-6642
- Référence fabricant:
- TGS5042-A00
- Fabricant:
- Figaro
Offre groupée disponible
Sous-total (1 unité)*
30,46 €
(TVA exclue)
36,86 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 17 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 20 unité(s) expédiée(s) à partir du 27 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 - 4 | 30,46 € |
| 5 + | 28,39 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 134-6642
- Référence fabricant:
- TGS5042-A00
- Fabricant:
- Figaro
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Figaro | |
| Gases Detected | Carbon Monoxide | |
| Product Type | Air Quality Sensor | |
| Accuracy | 5 %FS | |
| Response Time | 60s | |
| Application | Co Monitor, Fire Detection, Residential, Ventilation, Commercial | |
| Maximum Supply Voltage | 10mV | |
| Power Source | Battery Power Supply | |
| Pin Count | 4 | |
| Minimum Operating Temperature | -5°C | |
| Maximum Operating Temperature | 55°C | |
| Height | 14.6mm | |
| Width | 14.1 mm | |
| Series | TGS5042 | |
| Standards/Approvals | and RoHS, EN50291, Meets UL2034, UL Component | |
| Length | 49.7mm | |
| Weight | 12g | |
| Automotive Standard | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Figaro | ||
Gases Detected Carbon Monoxide | ||
Product Type Air Quality Sensor | ||
Accuracy 5 %FS | ||
Response Time 60s | ||
Application Co Monitor, Fire Detection, Residential, Ventilation, Commercial | ||
Maximum Supply Voltage 10mV | ||
Power Source Battery Power Supply | ||
Pin Count 4 | ||
Minimum Operating Temperature -5°C | ||
Maximum Operating Temperature 55°C | ||
Height 14.6mm | ||
Width 14.1 mm | ||
Series TGS5042 | ||
Standards/Approvals and RoHS, EN50291, Meets UL2034, UL Component | ||
Length 49.7mm | ||
Weight 12g | ||
Automotive Standard No | ||
TGS5042 & TGS5342 Carbon Monoxide Sensors
Battery operable electrochemical gas sensors from Figaro for the detection of carbon monoxide. The devices use an environmentally friendly electrolyte and feature reduced sensitivity to interference gases. The TGS5042 type utilizes a standard AA (LR6) battery-sized package with two termination options; the reduced-size TGS5342 is 22mm shorter in length.
• Battery operable
• High repeatability/selectivity to CO
• Linear relationship between CO gas concentration and sensor output
• Simple calibration
• High accuracy with good long term stability
• Long operating life
• UL recognized component
• Meets UL2034, EN50291, and RoHS requirements
PCB Mounted Gas Sensors
Operating conditions in which Sensors are used will vary with each customer's application. Gas and oxygen sensors are not authorised for use as critical components in life support applications wherein a failure or malfunction of the products may result in injury or threat to life. Non-calibrated PCB gas sensors will not operate properly if not calibrated prior to usage.
Semiconductor gas sensors for gas detection, air quality control, HVAC, appliance and automotive industries. Characteristics of the products in this range are small size, low cost, long life, low power consumption and no maintenance requirement
Liens connexes
- Figaro FECS40-1000, Carbon Monoxide Air Quality Sensor
- Figaro TGS3870-B00 Methane Air Quality Sensor for Combination Methane & Carbon Monoxide Detectors
- Figaro TGS813-A00, Combustible Air Quality Sensor
- Figaro TGS826-A00, Ammonia Air Quality Sensor
- Figaro TGS821-A00, Hydrogen Air Quality Sensor
- Figaro TGS823-A00, Organic Vapour Air Quality Sensor
- Figaro TGS822-A00, Organic Vapour Air Quality Sensor
- Figaro TGS816-A00 Methane, Propane Air Quality Sensor