Knipex Knipex 1.3 mm Without Bevel Side cutter
- N° de stock RS:
- 267-7128
- Référence fabricant:
- 77 41 115
- Fabricant:
- Knipex
Sous-total (1 unité)*
46,27 €
(TVA exclue)
55,99 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 7 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 10 unité(s) expédiée(s) à partir du 14 décembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 46,27 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-7128
- Référence fabricant:
- 77 41 115
- Fabricant:
- Knipex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Cutter | |
| Non-Sparking | No | |
| Jaw Width | 11mm | |
| Overall Length | 115mm | |
| Jaw Length | 13mm | |
| VDE/1000V Approved | No | |
| Application | Electronic, Fine Cutting Work, Fine Mechanics | |
| Height Safe | No | |
| Jaw Material | Ball Bearing Chrome Steel | |
| ESD Safe | No | |
| Grip Material | Multi-Component | |
| Maximum Cutting Capacity | 1.3mm | |
| Standards/Approvals | DIN ISO 9654 | |
| Cut Type | Without Bevel | |
| Sélectionner tout | ||
|---|---|---|
Marque Knipex | ||
Product Type Side cutter | ||
Sub Type Cutter | ||
Non-Sparking No | ||
Jaw Width 11mm | ||
Overall Length 115mm | ||
Jaw Length 13mm | ||
VDE/1000V Approved No | ||
Application Electronic, Fine Cutting Work, Fine Mechanics | ||
Height Safe No | ||
Jaw Material Ball Bearing Chrome Steel | ||
ESD Safe No | ||
Grip Material Multi-Component | ||
Maximum Cutting Capacity 1.3mm | ||
Standards/Approvals DIN ISO 9654 | ||
Cut Type Without Bevel | ||
Non conforme
- Pays d'origine :
- DE
KNIPEX 77 41 115 Electronics Diagonal Cutter with box joint with non-slip plastic grips 115 mm
77 41 115 Electronics Diagonal Cutter For fine cutting work, e.g. in electronics and fine mechanics. Load-optimised for a more direct feel when working. Sturdy, zero-backlash box joint. Low-friction double spring for smooth and even opening. The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. Cutters additionally laser hardened, cutter hardness at least 62 HRC. High, slim sleeves for fine and comfortable gripping between thumb and index finger. - Cutting capacities medium hard wire (diameter): Ø 0.8mm- Cutting capacities soft wire (diameter): Ø 1.3mm- Jaw length (B): 13mm- Jaw thickness (joint) (D): 7mm- Head width (A): 11mm
Technical attributes
For Fine Cutting Work, E.G. In Electronics And Fine Mechanics
Load-Optimised For A More Direct Feel When Working
Sturdy, Zero-Backlash Box Joint
Low-Friction Double Spring For Smooth And Even Opening
The Polish Or Mirror Polish Together With A Fine Film Of Oil Offer Effective Rust Protection - No Circuit Faults Caused By Peeling Chrome From Plated Tools
Load-Optimised For A More Direct Feel When Working
Sturdy, Zero-Backlash Box Joint
Low-Friction Double Spring For Smooth And Even Opening
The Polish Or Mirror Polish Together With A Fine Film Of Oil Offer Effective Rust Protection - No Circuit Faults Caused By Peeling Chrome From Plated Tools
Liens connexes
- Knipex Knipex ESD Safe 1.3 mm Without Bevel Side cutter
- Knipex 77 42 115 ESD ESD Safe 1.3 mm Without Bevel Side cutter
- Knipex Knipex 1.3 mm With Bevel Side cutter
- Knipex Knipex 1.3 mm Small Bevel Side cutter
- Knipex Knipex 1.3 mm Without Bevel Side cutter
- Knipex Knipex 1.6 mm Without Bevel Side cutter
- Knipex Knipex ESD Safe 1.3 mm With Bevel Side cutter
- Knipex Knipex 1.6 mm Small Bevel Side cutter
