Knipex Knipex 1.3 mm Small Bevel Side cutter
- N° de stock RS:
- 267-7124
- Référence fabricant:
- 77 21 115 N
- Fabricant:
- Knipex
Sous-total (1 unité)*
44,53 €
(TVA exclue)
53,88 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 8 unité(s) prête(s) à être expédiée(s)
- Plus 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 44,53 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-7124
- Référence fabricant:
- 77 21 115 N
- Fabricant:
- Knipex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Cutter | |
| Non-Sparking | No | |
| Overall Length | 115mm | |
| Jaw Width | 11mm | |
| Jaw Length | 13mm | |
| VDE/1000V Approved | No | |
| Height Safe | No | |
| Application | Fine Mechanics, Electronic | |
| ESD Safe | No | |
| Jaw Material | Ball Bearing Chrome Steel | |
| Handle Material | Plastic | |
| Grip Material | Plastic Coated | |
| Standards/Approvals | DIN ISO 9654 | |
| Maximum Cutting Capacity | 1.3mm | |
| Cut Type | Small Bevel | |
| Sélectionner tout | ||
|---|---|---|
Marque Knipex | ||
Product Type Side cutter | ||
Sub Type Cutter | ||
Non-Sparking No | ||
Overall Length 115mm | ||
Jaw Width 11mm | ||
Jaw Length 13mm | ||
VDE/1000V Approved No | ||
Height Safe No | ||
Application Fine Mechanics, Electronic | ||
ESD Safe No | ||
Jaw Material Ball Bearing Chrome Steel | ||
Handle Material Plastic | ||
Grip Material Plastic Coated | ||
Standards/Approvals DIN ISO 9654 | ||
Maximum Cutting Capacity 1.3mm | ||
Cut Type Small Bevel | ||
Non conforme
- Pays d'origine :
- DE
KNIPEX 77 21 115 N Electronics Diagonal Cutter with box joint with non-slip plastic grips 115 mm
77 21 115 N Electronics Diagonal Cutter For fine cutting work, e.g. in electronics and fine mechanics. Load-optimised for a more direct feel when working. Sturdy, zero-backlash box joint. Low-friction double spring for smooth and even opening. The polish or mirror polish together with a fine film of oil offer effective rust protection - no circuit faults caused by peeling chrome from plated tools. Cutters additionally laser hardened, cutter hardness at least 62 HRC. High, slim sleeves for fine and comfortable gripping between thumb and index finger. - Cutting capacities medium hard wire (diameter): Ø 1.0mm- Cutting capacities soft wire (diameter): Ø 1.3mm- Jaw length (B): 13mm- Jaw thickness (joint) (D): 7mm- Head width (A): 11mm
Technical attributes
For Fine Cutting Work, E.G. In Electronics And Fine Mechanics
Load-Optimised For A More Direct Feel When Working
Sturdy, Zero-Backlash Box Joint
Low-Friction Double Spring For Smooth And Even Opening
The Polish Or Mirror Polish Together With A Fine Film Of Oil Offer Effective Rust Protection - No Circuit Faults Caused By Peeling Chrome From Plated Tools
Load-Optimised For A More Direct Feel When Working
Sturdy, Zero-Backlash Box Joint
Low-Friction Double Spring For Smooth And Even Opening
The Polish Or Mirror Polish Together With A Fine Film Of Oil Offer Effective Rust Protection - No Circuit Faults Caused By Peeling Chrome From Plated Tools
Liens connexes
- Knipex Knipex 1.3 mm Small Bevel Side cutter
- Knipex Knipex 1.6 mm Small Bevel Side cutter
- Knipex Knipex 1.3 mm Without Bevel Side cutter
- Knipex Knipex 1.3 mm With Bevel Side cutter
- Knipex Knipex ESD Safe 1.6 mm Small Bevel Side cutter
- Knipex Knipex ESD Safe 800 μm Small Bevel Side cutter
- Knipex Knipex ESD Safe 1.3 mm With Bevel Side cutter
- Knipex Knipex ESD Safe 1.3 mm Without Bevel Side cutter
