Knipex Knipex With Bevel ESD Safe Diagonal Cutter
- N° de stock RS:
- 287-8681
- Numéro d'article Distrelec:
- 180-44-829
- Référence fabricant:
- 77 32 115 ESD
- Fabricant:
- Knipex
Sous-total (1 unité)*
55,33 €
(TVA exclue)
66,95 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 75,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
- Plus 3 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 30 unité(s) expédiée(s) à partir du 04 mars 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 55,33 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 287-8681
- Numéro d'article Distrelec:
- 180-44-829
- Référence fabricant:
- 77 32 115 ESD
- Fabricant:
- Knipex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Diagonal Cutter | |
| Non-Sparking | No | |
| Jaw Width | 11mm | |
| Overall Length | 115mm | |
| Jaw Length | 10mm | |
| VDE/1000V Approved | No | |
| Application | Electronic | |
| Height Safe | No | |
| ESD Safe | Yes | |
| Jaw Material | High Grade Special Tool Steel | |
| Grip Material | Multi-Component | |
| Handle Material | Bi-Metal | |
| Maximum Cutting Capacity | 1.3mm | |
| Standards/Approvals | DIN ISO 9654 | |
| Cut Type | With Bevel | |
| Sélectionner tout | ||
|---|---|---|
Marque Knipex | ||
Product Type Side cutter | ||
Sub Type Diagonal Cutter | ||
Non-Sparking No | ||
Jaw Width 11mm | ||
Overall Length 115mm | ||
Jaw Length 10mm | ||
VDE/1000V Approved No | ||
Application Electronic | ||
Height Safe No | ||
ESD Safe Yes | ||
Jaw Material High Grade Special Tool Steel | ||
Grip Material Multi-Component | ||
Handle Material Bi-Metal | ||
Maximum Cutting Capacity 1.3mm | ||
Standards/Approvals DIN ISO 9654 | ||
Cut Type With Bevel | ||
Non conforme
- Pays d'origine :
- DE
Wire Cutter with pointed head, small bevel 115mm
Features / Benefits :
ESD - Static Dissipative Handles
Sturdy, play-free interlocking hinge
Low-friction double spring for smooth, even opening of the clamp
Mirror polishing, combined with a thin layer of oil, provides good protection against rust, thus avoiding disturbances in the electrical circuit caused by flaking chrome particles
Induction hardened cutting edges
Two-tone black/grey sheathing
Pointed head with small bevel
Cutting edge hardness approx. 57 HRC;Special quality tool steel, forged, oil-hardened in several stages.
ESD Diagonal Box Jointed Cutters
Electrically discharging version - dissipative
Manufactured from special tool steel which has been oil-hardened and tempered
Cutting edge hardness 57 HRC
Two colour dual component handles, red/blue
Low friction double spring for gentle and even opening
The polished finish, together with a fine film of oil offer the best possible rust protection – no circuit faults caused by peeling chrome from plated tools
Liens connexes
- Knipex Knipex With Bevel ESD Safe Diagonal Cutter
- Knipex Knipex Without Bevel ESD Safe Diagonal Cutter
- Knipex Knipex Small Bevel ESD Safe Diagonal Cutter
- Knipex 77 42 115 ESD Without Bevel ESD Safe Diagonal Cutter
- Knipex Knipex Small Bevel ESD Safe Side Cutter
- Knipex Knipex With Bevel Diagonal Cutter
- Knipex Knipex Small Bevel Diagonal Cutter
- Knipex Knipex With Bevel ESD Safe Side Cutter