Knipex Knipex 1.3 mm With Bevel Side cutter
- N° de stock RS:
- 267-7110
- Référence fabricant:
- 75 22 125
- Fabricant:
- Knipex
Sous-total (1 unité)*
50,90 €
(TVA exclue)
61,59 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 5 unité(s) prête(s) à être expédiée(s)
- Plus 8 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 50,90 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-7110
- Référence fabricant:
- 75 22 125
- Fabricant:
- Knipex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Cutter | |
| Non-Sparking | No | |
| Overall Length | 125mm | |
| Jaw Width | 10.5mm | |
| Jaw Length | 14mm | |
| Height Safe | No | |
| Application | Hard and Piano Wire, Soft | |
| Jaw Material | High Grade Special Tool Steel | |
| ESD Safe | No | |
| Handle Material | Plastic | |
| Grip Material | Plastic | |
| Standards/Approvals | DIN ISO 9654 | |
| Maximum Cutting Capacity | 1.3mm | |
| Cut Type | With Bevel | |
| Sélectionner tout | ||
|---|---|---|
Marque Knipex | ||
Product Type Side cutter | ||
Sub Type Cutter | ||
Non-Sparking No | ||
Overall Length 125mm | ||
Jaw Width 10.5mm | ||
Jaw Length 14mm | ||
Height Safe No | ||
Application Hard and Piano Wire, Soft | ||
Jaw Material High Grade Special Tool Steel | ||
ESD Safe No | ||
Handle Material Plastic | ||
Grip Material Plastic | ||
Standards/Approvals DIN ISO 9654 | ||
Maximum Cutting Capacity 1.3mm | ||
Cut Type With Bevel | ||
Non conforme
- Pays d'origine :
- DE
The Knipex electronics diagonal cutter has bolted joint for high precision and stress tolerance.For ultra fine cutting work in electronics and fine mechanics.With sharp, ground cutting edges for soft and hard wire and piano wire.
Cutting edges additionally induction hardened, cutting edge hardness approximate 62 HRC
Low friction double spring for gentle and even opening
This cutter comes with bevel
High grade special tool steel and forged, multi stage oil hardened
Liens connexes
- Knipex Knipex 1.3 mm With Bevel Side cutter
- Knipex Knipex 1.3 mm Without Bevel Side cutter
- Knipex Knipex ESD Safe 1.3 mm With Bevel Side cutter
- Knipex Knipex 800 μm With Bevel Side cutter
- Knipex Knipex ESD Safe 1.3 mm Without Bevel Side cutter
- Knipex Knipex 1.3 mm Small Bevel Side cutter
- Knipex Knipex 2.5 mm Without Bevel Side cutter
- Knipex Knipex 1.7 mm Without Bevel Side cutter
