Knipex Knipex 1.3 mm With Bevel Side cutter
- N° de stock RS:
- 267-7109
- Numéro d'article Distrelec:
- 302-23-026
- Référence fabricant:
- 75 12 125
- Fabricant:
- Knipex
Sous-total (1 unité)*
58,30 €
(TVA exclue)
70,54 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 8 unité(s) prête(s) à être expédiée(s)
- Plus 1 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 58,30 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 267-7109
- Numéro d'article Distrelec:
- 302-23-026
- Référence fabricant:
- 75 12 125
- Fabricant:
- Knipex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Knipex | |
| Product Type | Side cutter | |
| Sub Type | Cutter | |
| Non-Sparking | No | |
| Overall Length | 125mm | |
| Jaw Width | 10.5mm | |
| Jaw Length | 14mm | |
| Height Safe | No | |
| Application | Fine Mechanics, Electronic | |
| ESD Safe | No | |
| Jaw Material | High Grade Special Tool Steel | |
| Grip Material | Plastic | |
| Handle Material | Plastic | |
| Maximum Cutting Capacity | 1.3mm | |
| Standards/Approvals | DIN ISO 9654 | |
| Cut Type | With Bevel | |
| Sélectionner tout | ||
|---|---|---|
Marque Knipex | ||
Product Type Side cutter | ||
Sub Type Cutter | ||
Non-Sparking No | ||
Overall Length 125mm | ||
Jaw Width 10.5mm | ||
Jaw Length 14mm | ||
Height Safe No | ||
Application Fine Mechanics, Electronic | ||
ESD Safe No | ||
Jaw Material High Grade Special Tool Steel | ||
Grip Material Plastic | ||
Handle Material Plastic | ||
Maximum Cutting Capacity 1.3mm | ||
Standards/Approvals DIN ISO 9654 | ||
Cut Type With Bevel | ||
Non conforme
- Pays d'origine :
- DE
KNIPEX 75 12 125 Electronics Diagonal Cutter with plastic handles burnished 125 mm
75 12 125 Electronics Diagonal Cutter For ultra fine cutting work, e.g. in electronics and fine mechanics. With sharp, ground cutting edges for soft and hard wire and piano wire. Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC. Low-friction double spring for smooth and even opening. with bevel and lead catcher, no uncontrolled loss of cut wire ends. - Cutting capacities medium hard wire (diameter): Ø 1.0mm- Cutting capacities hard wire (diameter): Ø 0.6mm- Cutting capacities piano wire (diameter): Ø 0.4mm- Cutting capacities soft wire (diameter): Ø 0.2 – 1.3mm- Jaw length (B): 14mm- Jaw thickness (joint) (D): 6.5mm- Head width (A): 10.5mm
Technical attributes
For Ultra Fine Cutting Work, E.G. In Electronics And Fine Mechanics
With Sharp, Ground Cutting Edges For Soft And Hard Wire And Piano Wire
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 62 Hrc
Low-Friction Double Spring For Smooth And Even Opening
With Sharp, Ground Cutting Edges For Soft And Hard Wire And Piano Wire
Cutting Edges Additionally Induction-Hardened, Cutting Edge Hardness Approx. 62 Hrc
Low-Friction Double Spring For Smooth And Even Opening
Liens connexes
- Knipex Knipex 1.3 mm With Bevel Side cutter
- Knipex Knipex 1.3 mm Without Bevel Side cutter
- Knipex Knipex ESD Safe 1.3 mm With Bevel Side cutter
- Knipex Knipex 800 μm With Bevel Side cutter
- Knipex Knipex 1.7 mm With Bevel Side cutter
- Knipex Knipex 3 mm With Bevel Side cutter
- Knipex Knipex ESD Safe 1.3 mm Without Bevel Side cutter
- Knipex Knipex 1.3 mm Small Bevel Side cutter
