Fluke I30 Current Clamp, 30 A DC Max, AC/DC Adapter, 30 A ac AC Max, Current Output

Voir l’ensemble des Current Clamps

Sous-total (1 unité)*

694,00 €

(TVA exclue)

839,74 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 5 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 2 unité(s) expédiée(s) à partir du 22 octobre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +694,00 €

*Prix donné à titre indicatif

N° de stock RS:
653-6763
Numéro d'article Distrelec:
176-12-666
Référence fabricant:
i30
Fabricant:
Fluke
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Fluke

Adapter Type

AC/DC

Product Type

Current Clamp

Maximum DC Current

30A

Maximum AC Current

30A ac

Accuracy

±1% + 2 mA

Maximum Conductor Size

19mm

Cable Length

1.5m

Output Type

Current

Connector Type

4 mm Plug

Battery Type

Alkaline

Battery Life

30h

Minimum Operating Temperature

0°C

Maximum Operating Temperature

50°C

Model Number

I30

Standards/Approvals

IEC 61326-1

Safety Category Voltage

300V

Safety Category Level

CAT III

Statut RoHS : Exempté

Pays d'origine :
CN

Fluke Current Clamp, 30A Maximum DC Current, 20A Maximum AC Current - Fluke i30


This current clamp measures both AC and DC current using Hall effect sensing for non-intrusive measurement in industrial and field environments. It connects to multimeters and recording instruments via a 4 mm plug and operates safely at CAT III 300 V for on-site electrical diagnostics and monitoring.

Features and Benefits:


• Measures up to 30 A DC for broad current range capability
• Accurately resolves down to ±1%+2 mA for precise readings
• Frequency response DC to 20 kHz for high-frequency signals
• 100 mV/A output sensitivity for straightforward instrument interfacing
• Manual zero adjust via thumbwheel for fast baseline correction
• Powered by 9 V alkaline battery providing approximately 30 h operation

Applications


• Suitable for diagnostics with handheld multimeters and recorders
• Used for maintenance on installations rated to CAT III 300 V
• Ideal for measuring large conductors up to 19 mm diameter
• Can be used for both DC system commissioning and AC troubleshooting
• Used with data loggers for transient or high-frequency current capture

What connection does it provide for multimeter integration?


It provides a 4 mm safety output connection compatible with standard multimeter inputs.

How is the clamp powered and how long will it run on one battery?


It uses a 9 V alkaline battery and operates for about 30 h with a low-battery indicator.

What operating temperatures does it support during use?


It is specified for operation between 0 °C and 50 °C.

What load conditions must connected instruments meet for accurate readings?


The clamp expects a load impedance greater than 100 kΩ and capacitance up to 100 pF for correct performance.

What supply and loading conditions ensure accurate readings?


Use a 9V alkaline PP3 battery and connect to instruments with input impedance greater than 10 kΩ and capacitance up to 100 pF.

Warning

Use of the probe on uninsulated conductors is limited to 300V ac rms or dc and frequencies below 1 kHz.

Supplied with

Alkaline PP3 battery and operators manual.

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.

adresse e-mail

Les données personnelles que vous nous fournissez en vous inscrivant à cette liste de diffusion seront traitées conformément à notre politique de confidentialité.