Fluke I310S Current Clamp, 450 A DC Max, AC/DC Adapter, 300 A ac AC Max, Voltage Output

Voir l’ensemble des Current Clamps

Sous-total (1 unité)*

576,00 €

(TVA exclue)

696,96 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Stock limité
  • Plus 2 unité(s) expédiée(s) à partir du 30 mars 2026
  • Plus 3 unité(s) expédiée(s) à partir du 06 avril 2026
  • Plus 3 unité(s) expédiée(s) à partir du 16 avril 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +576,00 €

*Prix donné à titre indicatif

Options d'étalonnage

presentation
Fluke I310S Current Clamp, 450 A DC Max, AC/DC Adapter, 300 A ac AC Max, Voltage Output - RSCAL
Type d'étalonnage:
RSCAL
N° de stock RS
911-9611

la pièce

677,00 €

(TVA exclue)

819,17 €

(TVA incluse)

presentation
Fluke I310S Current Clamp, 450 A DC Max, AC/DC Adapter, 300 A ac AC Max, Voltage Output - UKAS
Type d'étalonnage:
UKAS
N° de stock RS
911-9620

la pièce

674,00 €

(TVA exclue)

815,54 €

(TVA incluse)

N° de stock RS:
401-422
Référence fabricant:
FLUKE I310S
Fabricant:
Fluke
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Fluke

Product Type

Current Clamp

Adapter Type

AC/DC

Maximum DC Current

450A

Maximum AC Current

300A ac

Accuracy

±1% + 300 mA

Maximum Conductor Size

19mm

Cable Length

2m

Output Type

Voltage

Connector Type

BNC

Battery Type

PP3

Battery Life

30h

Minimum Operating Temperature

-10°C

Maximum Operating Temperature

50°C

Standards/Approvals

No

Model Number

I310S

Safety Category Level

CAT III

Safety Category Voltage

300V

Statut RoHS : Exempté

Pays d'origine :
CN

Fluke Current Clamp, 300A Maximum AC Current, 450A Maximum DC Current - FLUKE I310S


This current clamp is a Hall-effect probe designed for non-intrusive measurement of both AC and DC currents when used with oscilloscopes, multimeters or recording instruments. It converts current into a voltage output via a BNC connection and is suitable for field and bench work where accurate waveform capture and DC measurement are required.

Features & Benefits


• ±1% accuracy Plus offset for precise measurement across ranges
• 30A/300A AC and ±45A/450A DC selectable ranges for versatility
• DC to 20kHz small-signal bandwidth for transient and steady-state capture
• Manual output zero adjust for quick baseline correction
• 2m cable with BNC output for easy connection to test equipment
• 19mm conductor aperture for single-core conductor access

Applications


• Suitable for inrush current diagnostics on motors and drives
• Ideal for waveform capture on oscilloscopes in test labs
• Used with multimeters for service and commissioning checks
• Can be used for DC current measurement in battery systems
• Used for maintenance checks in automation and control panels

What power source does it require and how long does it run?


It uses a single 9V alkaline battery and provides approximately 30 h of operation with a low-battery indicator.

How does it handle high short-duration currents?


The probe tolerates inrush events up to 600A AC rms maximum without damage when used within specified limits.

What environmental conditions can it operate in?


It functions between -10°C and +50°C and is rated for 15%–85% non-condensing humidity during operation.

How is safety addressed for measurements on live conductors?


The probe is designed for measurements on uninsulated conductors up to 300V and meets relevant IEC safety standards for use in industrial environments.

What output sensitivity and loading should be expected by instruments?


Output sensitivity varies with range from 10 mV/A to 1 mV/A and requires input impedance greater than 10 kΩ with capacitance up to 100 pF.

Liens connexes