Chauvin Arnoux PAC 27 Current Clamp, 1.4 kA DC Max, AC/DC Adapter, 1 kA AC Max, UKAS
- N° de stock RS:
- 189-4674
- Référence fabricant:
- P01120127
- Fabricant:
- Chauvin Arnoux
Actuellement indisponible
Désolés, nous ne savons pas quand ce produit sera réapprovisionné.
- N° de stock RS:
- 189-4674
- Référence fabricant:
- P01120127
- Fabricant:
- Chauvin Arnoux
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Chauvin Arnoux | |
| Adapter Type | AC/DC | |
| Product Type | Current Clamp | |
| Maximum DC Current | 1.4kA | |
| Maximum AC Current | 1kA | |
| Accuracy | 1.5 % | |
| Maximum Conductor Size | 39mm | |
| Cable Length | 2m | |
| Connector Type | BNC Jack Isolated Male | |
| Minimum Operating Temperature | -10°C | |
| Battery Life | 50h | |
| Maximum Operating Temperature | 55°C | |
| Standards/Approvals | No | |
| Model Number | PAC 27 | |
| Calibrated | UKAS | |
| Safety Category Voltage | 300V, 600V | |
| Safety Category Level | CAT IV, CAT III | |
| Sélectionner tout | ||
|---|---|---|
Marque Chauvin Arnoux | ||
Adapter Type AC/DC | ||
Product Type Current Clamp | ||
Maximum DC Current 1.4kA | ||
Maximum AC Current 1kA | ||
Accuracy 1.5 % | ||
Maximum Conductor Size 39mm | ||
Cable Length 2m | ||
Connector Type BNC Jack Isolated Male | ||
Minimum Operating Temperature -10°C | ||
Battery Life 50h | ||
Maximum Operating Temperature 55°C | ||
Standards/Approvals No | ||
Model Number PAC 27 | ||
Calibrated UKAS | ||
Safety Category Voltage 300V, 600V | ||
Safety Category Level CAT IV, CAT III | ||
Statut RoHS : Exempté
- Pays d'origine :
- FR
The PAC Series is a range of Hall-effect current clamps for measuring direct and alternating currents. 2 forms are proposed to clamp cables up to 39 mm or 2x25.4 mm in diameter, as well as small busbars. The range comprises PAC1x models and PAC2x models for higher currents. When used with an oscilloscope, this isolated current sensor has 2 sensitivities and allows you to view currents with a bandwidth of up to 30 kHz and Peak currents up to 1,400 A DC or Peak. It is equipped with a simplified ZeroDC adjustment system and a deactivatable automatic standby function.
Rated current: 100 AAC/150 ADC - 1,000 A AC/1,400 A DC
Output signal: DC and AC voltage
Output / input ratio: 10 mV / A, 1 mV / A
Output via coaxial cable and isolated BNC male plug
Liens connexes
- Chauvin Arnoux PAC 27 Current Clamp AC/DC Adapter, 1 kA AC Max
- Chauvin Arnoux PAC 27 Current Clamp AC/DC Adapter RSCAL
- Chauvin Arnoux Current Clamp AC/DC Adapter, 1 kA AC Max
- Chauvin Arnoux Current Clamp AC/DC Adapter Voltage Output
- Chauvin Arnoux Current Clamp AC/DC Adapter Voltage Output, RSCAL
- Chauvin Arnoux Current Clamp AC/DC Adapter Voltage Output, UKAS
- Chauvin Arnoux MiniFlex MA110-170 Current Probe 30 kA AC Max, Voltage Output
- Chauvin Arnoux PAC 17 Current Clamp AC/DC Adapter, 400 A AC Max
