Knipex Crimp Tool for Wire Ferrules

Voir l’ensemble des Crimp Tools

Sous-total (1 unité)*

211,34 €

(TVA exclue)

255,72 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
Commandes ci-dessous 75,00 € coût (TVA exclue) 5,95 €.
En stock
  • 243 unité(s) prête(s) à être expédiée(s)
  • Plus 232 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +211,34 €

*Prix donné à titre indicatif

N° de stock RS:
336-8179
Numéro d'article Distrelec:
180-54-634
Référence fabricant:
97 53 04
Fabricant:
Knipex
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Knipex

Product Type

Crimp Tool

For Use With

Wire Ferrules

Height Safe

No

Overall Length

180mm

Minimum Wire Size AWG

28

Minimum Wire Size mm²

0.08

Maximum Wire Size AWG

6

Maximum Wire Size mm²

16

Non conforme

Pays d'origine :
DE

Automatic crimping pliers for wire end ferrules from 0.08 to 16mm² with side access


This self-adjusting crimping tool is designed to crimp wire end ferrules onto stripped multi-stranded wires, with a size range of 0.08 to 10mm² + 16mm² (with the rotation of the side adjustment wheel and thus increase the crimping capacity). The gear ratio of this crimping tool has been well designed and it is therefore easy to use, offering a comfortable grip and allowing the user to crimp easily with a perfect result. Crimping can be easily achieved, leaving a square profile on the end sleeves (cable ends).

Features and benefits


- Reduced handle opening

- For crimping cable end sleeves according to DIN 46228 Part 1 + 4 from 0.08 to 16 mm² - AWG 28 to 5

- Automatic adjustment to the desired ferrule size

- Constantly high crimping quality thanks to forced locking (can be released)

- Crimping pressure precisely set at the factory (calibrated)

- Increased force due to toggle gear for less fatigue

- Very comfortable to use thanks to its practical shape and light weight

- Square crimping also for wire end ferrules up to 16 mm².

- Square crimp for optimum contact surfaces in the terminal

- Particularly suitable for all twin wire end ferrules up to 2 x 6 mm2 or 2 x AWG 8

- Capacities mm² / AWG : 0.08 to 16 mm². AWG 28 to 5

- Material : special grade chrome vanadium electrical steel, oil quenched

Liens connexes