Knipex Twistor 16 Crimp Tool for Wire Ferrules
- N° de stock RS:
- 176-4188
- Numéro d'article Distrelec:
- 301-16-795
- Référence fabricant:
- 97 53 18
- Fabricant:
- Knipex
Sous-total (1 unité)*
241,59 €
(TVA exclue)
292,32 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 1 unité(s) prête(s) à être expédiée(s)
- Plus 10 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 19 unité(s) expédiée(s) à partir du 26 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 241,59 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 176-4188
- Numéro d'article Distrelec:
- 301-16-795
- Référence fabricant:
- 97 53 18
- Fabricant:
- Knipex
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Knipex | |
| Product Type | Crimp Tool | |
| For Use With | Wire Ferrules | |
| Height Safe | No | |
| Series | Twistor 16 | |
| Overall Length | 200mm | |
| Minimum Wire Size AWG | 28AWG | |
| Maximum Wire Size AWG | 6AWG | |
| Minimum Wire Size mm² | 0.08 | |
| Maximum Wire Size mm² | 16 | |
| Sélectionner tout | ||
|---|---|---|
Marque Knipex | ||
Product Type Crimp Tool | ||
For Use With Wire Ferrules | ||
Height Safe No | ||
Series Twistor 16 | ||
Overall Length 200mm | ||
Minimum Wire Size AWG 28AWG | ||
Maximum Wire Size AWG 6AWG | ||
Minimum Wire Size mm² 0.08 | ||
Maximum Wire Size mm² 16 | ||
Non conforme
- Pays d'origine :
- DE
Automatic crimping pliers for wire end ferrules from 0.08 to 16mm² with 360° rotating head
The Knipex 16 Series Cable Crimper for end sleeves has a square crimp profile and high cable crimping capacity. It has a 360° rotating crimping die, with 8 tactile locking positions and has a high crimping quality. It is self-adjusting so there is no risk of crimping errors due to using the wrong crimping die or setting.
Features and Benefits
- 360° rotating crimping head with 8 engagement positions
- Square crimp profile, crimping range
- Crimping of wire end ferrules possible in almost any working position
- Crimping tool automatically adjusts to the individual sections
- Crimp opening accessible from both sides, end sleeves can be moved
- Crimping of twin end sleeves up to 2 x 6 mm² is possible
- Crimp quality is always high thanks to the forced locking (can be unlocked)
- Lightweight and handy tool, hand force reduced by lever mechanisms
- Compact design
- Ergonomic handles
- Slim head for ideal accessibility
- Capacities mm² / AWG : from 0.14 to 16 mm², AWG from 28 to 5
- Material: special grade chrome vanadium electric steel, oil-hardened
Typical applications
Crimping pliers can be used in many applications:
- Maintenance and repair
- Electrical installations
- Crimp shop
Product Maintenance
- To maintain proper operation and long service life, the shafts and other moving parts should be lubricated regularly.
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.
- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.
*Use a light non-mineral oil
Liens connexes
- Knipex Crimp Tool for Wire Ferrules
- Knipex 97 Crimp Tool for Twin Bootlace Ferrule
- Knipex 97 0.14 To 10 mm² Crimp Tool for Bootlace Ferrule
- Knipex 97 1 mm Crimp Tool for Bootlace Ferrule
- Knipex 97 53 09 0.08 - 10.0 and 16.0 mm² Crimp Tool Crimp Tool for Bootlace Ferrule
- Knipex 97 Crimp Tool for Bootlace Ferrule
- Knipex 97 4 mm Crimp Tool for Bootlace Ferrule
- Knipex 97 4.5 mm Crimp Tool for Bootlace Ferrule