Knipex 97 53 09 0.08 - 10.0 and 16.0 mm² Crimp Tool Crimp Tool for Bootlace Ferrule

Voir l’ensemble des Crimp Tools

Sous-total (1 unité)*

230,50 €

(TVA exclue)

278,90 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • Plus 28 unité(s) expédiée(s) à partir du 23 février 2026
  • Plus 25 unité(s) expédiée(s) à partir du 23 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +230,50 €

*Prix donné à titre indicatif

N° de stock RS:
606-1641
Numéro d'article Distrelec:
180-50-349
Référence fabricant:
97 53 09
Fabricant:
Knipex
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Knipex

Sub Type

Crimp Tool

Product Type

Crimp Tool

Handle Type

Comfort Grip

For Use With

Bootlace Ferrule

Cutting Capacity

0.08 - 10.0 and 16.0 mm²

Height Safe

No

Series

97 53 09

Overall Length

190mm

Standards/Approvals

DIN 46228 parts 1 + 4

Minimum Wire Size AWG

28

Minimum Wire Size mm²

0.08

Maximum Wire Size mm²

16

Maximum Wire Size AWG

6

Statut RoHS : Exempté

Pays d'origine :
DE

Automatic crimping tool for wire end ferrules from 0.08 to 16mm² with front access


Features and benefits


- For crimping wire end ferrules according to DIN 46228 Part 1 + 4

- Automatic adjustment to the desired ferrule size: no crimping errors due to using the wrong profile

- End sleeves are inserted into the pliers from the front

- Very comfortable to use thanks to its practical shape and light weight - in one profile

- With lever for setting the crimping range from 0.08 to 10 or 16.0 mm².

- Particularly suitable for all twin conductor ferrules up to 2 x 6 mm² or 2 x AWG 8

- High-quality repeat crimping thanks to integrated locking (automatic release mechanism)

- Crimping pressure precisely defined (calibrated) at the factory, also adjustable

- Optimum force transmission through lever for fatigue-reduced operation

- Low weight

- Compact design

- Ergonomic handles

- Capacities mm² / AWG : crimps from 0.08 to 10.0 mm² and 16.0 mm² or AWG 28 to 5

- Material: special grade chrome vanadium electrical steel, oil quenched

Typical applications


Crimping pliers can be used in many applications:

- Maintenance and repair

- Electrical installations

- Crimp shop

Product Maintenance


- To maintain proper operation and long service life, the shafts and other moving parts should be lubricated regularly.

- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.

- The setting of the crimping die ranges should also be checked. - Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

*Use a light non-mineral oil

Liens connexes