Knipex Hand Ratcheting Crimp Tool for Wire Ferrules, 0.08 → 10mm² Wire

This portable crimping tool is designed to crimp ferrules to bare multi-stranded wires, with a size range of 0.08 to 10 mm². The transmission ratio of this crimping tool has been well designed and it is therefore easy to use, offering a comfortable grip and allowing the user to crimp easily with a perfect result. Crimping can be easily done, leaving a hexagonal profile on the end sleeves (cable ferrules) or crimped ferrules, which makes the operation much easier if the connection dimensions are right.

- Amplified force due to toggle gearing for less tiring work
- Very comfortable to use due to its convenient shape and light weight
- Automatic cable crimping tool with lateral insertion
- Automatically adjusts to different cable cross-sections
- Produces a hexagonal crimp profile for easy insertion into terminal blocks
- Optimal positioning of contact surfaces in the mounting connection for small connection sizes
- Automatic locking for reliable crimping in accordance with DIN standards (non-locking)
- Crimp pressure is factory set and calibrated
- Low effort lever mechanism
- Easy to use shape with ergonomic handles

Crimping pliers can be used in many applications:
- Maintenance and repair
- Electrical installations
- Crimp shop

- To maintain proper operation and a long service life, the shafts and other moving parts should be lubricated regularly.
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants
- The setting of the crimping die ranges should also be checked.
- Adjustment of the pressure setting pin is necessary when the tool preload decreases significantly.

*Use a light non-mineral oil