Knipex Hand Crimp Tool for Bootlace Ferrule

Voir l’ensemble des Crimp Tools

Sous-total (1 unité)*

31,00 €

(TVA exclue)

37,51 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 5 unité(s) prête(s) à être expédiée(s)
  • Plus 51 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 120 unité(s) expédiée(s) à partir du 04 février 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +31,00 €

*Prix donné à titre indicatif

N° de stock RS:
260-1548
Référence fabricant:
97 61 145 A
Fabricant:
Knipex
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Knipex

Wire Size AWG

23 → 13AWG

Product Type

Crimp Tool

For Use With

Bootlace Ferrule

Operation

Hand

Ratcheting

No

Height Safe

No

Overall Length

145 mm

Statut RoHS : Exempté

Pays d'origine :
DE

Crimping pliers for end sleeves 145mm - 0,25 - 2,5mm² - Chrome


Knipex high quality crimping pliers are designed to be used wherever end sleeves or cable ferrules are crimped. This portable crimping tool is designed to crimp pieces of material together in sizes from 0.25 to 2.5 mm², especially terminal blocks on control systems due to their generally high and thin supports. The four crimping dies with trapezoidal cross-sections are clearly visible and marked to ensure correct insertion of the end sleeves. After applying manual force to crimp the end caps, the cable end cap is crimped.

Features and benefits


- PVC coated

- For end sleeves in accordance with DIN 46228 parts 1 + 4 between 0.25 and 2.5 mm².
- 4 trapezoidal crimping sections (crimping dies)
- Clear marking for safe positioning and crimping

- Vanadium Electrical Steel - Forged, Oil Hardened

Typical applications


These crimping pliers can be used to work on
- IT control systems
- Domestic electrical systems
- Electronic systems

Product maintenance


- To maintain proper operation and long life, the shafts and other moving parts should be lubricated regularly.
- Lubrication* is recommended at least every 10,000 cycles when the tool is exposed to dirt or other contaminants.
*Use a light non-mineral oil.

Importance of a high quality crimp

If there are voids, corrosion can occur, causing resistance and excessive heat that damages the electrical connection. Using a good quality crimping tool will ensure a complete crimp, preventing future deterioration of the electrical connection and breakage of the insulation.

Liens connexes