RS Better World

Schneider Electric GC25 Contactor, 24V ac Coil, 2-Pole, 25 A 24V ac, 2 NC, 250V ac

N° de stock RS:: 744-6850
Référence fabricant:: GC2502B5
Fabricant:: Schneider Electric

Schneider Electric GC25 Contactor, 24V ac Coil, 2-Pole, 25 A 24V ac, 2 NC, 250V ac

Sous-total (1 unité)*

75,42 €

(TVA exclue)

91,26 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Stocké-e par le fabricant

Prêt à être expédié à partir du 03 décembre 2026

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	75,42 €

*Prix donné à titre indicatif

Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables.

En savoir plus sur les produits RS Better World

N° de stock RS:: 744-6850
Référence fabricant:: GC2502B5
Fabricant:: Schneider Electric

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Schneider Electric
	Product Type	Contactor
	Coil Voltage	24V ac
	Number of Poles	2
	Contact Voltage	250V ac
	Contact Current	25A
	Series	GC25
	Mount Type	DIN Rail
	Function	Motor Control, Straight
	Normal State Configuration	2 NC
	Auxiliary Contact Configuration	2 NC
	Terminal Type	Cable
	Minimum Operating Temperature	-5°C
	Contactor Application	Heating, Lighting, Motor
	Control Circuit Voltage Uc	24V ac
	Operational Current Ie	25A
	Maximum Operating Temperature	50°C
	Width	17.5mm
	Length	81mm
	Standards/Approvals	VDE 0110, RoHS, REACH, IEC 61095, IEC 60947-5
	Depth	65mm
	Better World Claim	Designed for Disassembly
	Better World Product	Yes
	Pole and Throw Configuration	2

	Sélectionner tout
	Marque Schneider Electric
	Product Type Contactor
	Coil Voltage 24V ac
	Number of Poles 2
	Contact Voltage 250V ac
	Contact Current 25A
	Series GC25
	Mount Type DIN Rail
	Function Motor Control, Straight
	Normal State Configuration 2 NC
	Auxiliary Contact Configuration 2 NC
	Terminal Type Cable
	Minimum Operating Temperature -5°C
	Contactor Application Heating, Lighting, Motor
	Control Circuit Voltage Uc 24V ac
	Operational Current Ie 25A
	Maximum Operating Temperature 50°C
	Width 17.5mm
	Length 81mm
	Standards/Approvals VDE 0110, RoHS, REACH, IEC 61095, IEC 60947-5
	Depth 65mm
	Better World Claim Designed for Disassembly
	Better World Product Yes
	Pole and Throw Configuration 2

Se connecter pour voir les modèles CAO

Schneider Electric TeSys GC Modular Contactors

TeSys GC Modular Contactors from Schneider Electric provides power switching in single phase, 3 or 4-phase loads. TeSys GC is a range of contactors that are safe, simple to use, and easy to install. The devices are compact in size and suitable for use in a wide variety of applications.

Features and Benefits

• Built-in auxiliary contacts for added switching capability

• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings

• Can be panel mounted with screws or DIN Rail mounted

• Impulse relay function

• Day-night function

• Class-2 insulation: continuous safety for operators and unqualified personnel

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. ;AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.;AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.;Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

Is the TeSys GC range a double break pole type contactor?

Yes the Tesys GC range uses linear translation movement that provides double breaking of the poles.

Schneider Electric Modular Contactors

Low noise a.c. compact modular contactors and accessories are ideal for heating lighting and building service type applications. The units are designed for mounting in control panels or cabinets on symmetrical DIN rail or they may be housed in modular enclosures.