RS Better World

Schneider Electric TeSyS GC Contactor, 230V ac Coil, 4-Pole 240V, 4 NC, 415V ac

N° de stock RS:: 744-6863
Référence fabricant:: GC2504M5
Fabricant:: Schneider Electric

Schneider Electric TeSyS GC Contactor, 230V ac Coil, 4-Pole 240V, 4 NC, 415V ac

Sous-total (1 unité)*

105,35 €

(TVA exclue)

127,47 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

En stock

3 unité(s) prête(s) à être expédiée(s)
Plus 2 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité
1 +	105,35 €

*Prix donné à titre indicatif

Notre gamme de produits Better World vous facilite l'accès à des produits plus durables et plus fiables.

En savoir plus sur les produits RS Better World

N° de stock RS:: 744-6863
Référence fabricant:: GC2504M5
Fabricant:: Schneider Electric

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Schneider Electric
	Coil Voltage	230V ac
	Product Type	Contactor
	Number of Poles	4
	Contact Voltage	415V ac
	Series	TeSyS GC
	Mount Type	DIN Rail
	Function	Motor Control
	Normal State Configuration	4 NC
	Number of Auxiliary Contacts	1
	Auxiliary Contact Configuration	1 NO
	Terminal Type	Cable
	Contactor Application	Heating, Lighting, Motor
	Minimum Operating Temperature	-5°C
	Control Circuit Voltage Uc	240V
	Operational Current Ie	25A
	Maximum Operating Temperature	50°C
	Depth	65mm
	Width	35mm
	Standards/Approvals	IEC 61095
	Length	81mm
	Better World Claim	Designed for Disassembly
	Better World Product	Yes
	Pole and Throw Configuration	4

	Sélectionner tout
	Marque Schneider Electric
	Coil Voltage 230V ac
	Product Type Contactor
	Number of Poles 4
	Contact Voltage 415V ac
	Series TeSyS GC
	Mount Type DIN Rail
	Function Motor Control
	Normal State Configuration 4 NC
	Number of Auxiliary Contacts 1
	Auxiliary Contact Configuration 1 NO
	Terminal Type Cable
	Contactor Application Heating, Lighting, Motor
	Minimum Operating Temperature -5°C
	Control Circuit Voltage Uc 240V
	Operational Current Ie 25A
	Maximum Operating Temperature 50°C
	Depth 65mm
	Width 35mm
	Standards/Approvals IEC 61095
	Length 81mm
	Better World Claim Designed for Disassembly
	Better World Product Yes
	Pole and Throw Configuration 4

Se connecter pour voir les modèles CAO

Schneider Electric TeSys GC Modular Contactors

TeSys GC Modular Contactors from Schneider Electric provides power switching in single phase, 3 or 4-phase loads. TeSys GC is a range of contactors that are safe, simple to use, and easy to install. The devices are compact in size and suitable for use in a wide variety of applications.

Features and Benefits

• Built-in auxiliary contacts for added switching capability

• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings

• Can be panel mounted with screws or DIN Rail mounted

• Impulse relay function

• Day-night function

• Class-2 insulation: continuous safety for operators and unqualified personnel

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. ;AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.;AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.;Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

Is the TeSys GC range a double break pole type contactor?

Yes the Tesys GC range uses linear translation movement that provides double breaking of the poles.

Schneider Electric Modular Contactors

Low noise a.c. compact modular contactors and accessories are ideal for heating lighting and building service type applications. The units are designed for mounting in control panels or cabinets on symmetrical DIN rail or they may be housed in modular enclosures.