Schneider Electric GC25 Contactor, 24V ac Coil, 1-Pole, 25 A, 6.25 kW 24V ac, 1 NO, 250V ac

N° de stock RS:: 744-6866
Référence fabricant:: GC2510B5
Fabricant:: Schneider Electric

Schneider Electric GC25 Contactor, 24V ac Coil, 1-Pole, 25 A, 6.25 kW 24V ac, 1 NO, 250V ac

Actuellement indisponible

Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.

Produit de remplacement

Ce produit n'est pas disponible actuellement. Voici notre produit de remplacement:

Schneider Electric GC25 Contactor, 230V ac Coil, 1-Pole, 25 A, 1.6 W 230V ac, 1 NO, 500V ac

N° de stock RS: 305-1405

la pièce

58,77 €

(TVA exclue)

71,11 €

(TVA incluse)

N° de stock RS:: 744-6866
Référence fabricant:: GC2510B5
Fabricant:: Schneider Electric

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Schneider Electric
	Product Type	Contactor
	Coil Voltage	24V ac
	Number of Poles	1
	Contact Voltage	250V ac
	Contact Current	25A
	Series	GC25
	Power Rating	6.25kW
	Mount Type	DIN Rail
	Function	Motor Control
	Normal State Configuration	1 NO
	Number of Auxiliary Contacts	1
	Auxiliary Contact Configuration	1 NO
	Terminal Type	Cable
	Control Circuit Voltage Uc	24V ac
	Contactor Application	Motor Control, Heating, Lighting
	Minimum Operating Temperature	-5°C
	Maximum Operating Temperature	50°C
	Standards/Approvals	IEC 61095
	Length	81mm
	Depth	65mm
	Width	17.5mm
	Pole and Throw Configuration	1P

	Sélectionner tout
	Marque Schneider Electric
	Product Type Contactor
	Coil Voltage 24V ac
	Number of Poles 1
	Contact Voltage 250V ac
	Contact Current 25A
	Series GC25
	Power Rating 6.25kW
	Mount Type DIN Rail
	Function Motor Control
	Normal State Configuration 1 NO
	Number of Auxiliary Contacts 1
	Auxiliary Contact Configuration 1 NO
	Terminal Type Cable
	Control Circuit Voltage Uc 24V ac
	Contactor Application Motor Control, Heating, Lighting
	Minimum Operating Temperature -5°C
	Maximum Operating Temperature 50°C
	Standards/Approvals IEC 61095
	Length 81mm
	Depth 65mm
	Width 17.5mm
	Pole and Throw Configuration 1P

Se connecter pour voir les modèles CAO

Schneider Electric TeSys GC Modular Contactors

TeSys GC Modular Contactors from Schneider Electric provides power switching in single phase, 3 or 4-phase loads. TeSys GC is a range of contactors that are safe, simple to use, and easy to install. The devices are compact in size and suitable for use in a wide variety of applications.

Features and Benefits

• Built-in auxiliary contacts for added switching capability

• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings

• Can be panel mounted with screws or DIN Rail mounted

• Impulse relay function

• Day-night function

• Class-2 insulation: continuous safety for operators and unqualified personnel

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. ;AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.;AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running.;Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

Is the TeSys GC range a double break pole type contactor?

Yes the Tesys GC range uses linear translation movement that provides double breaking of the poles.

Schneider Electric Modular Contactors

Low noise a.c. compact modular contactors and accessories are ideal for heating lighting and building service type applications. The units are designed for mounting in control panels or cabinets on symmetrical DIN rail or they may be housed in modular enclosures.