Wurth Elektronik 10 mH 2 A Common Mode Choke 85 mΩ 250V ac

N° de stock RS:: 185-7023
Référence fabricant:: 7448022010
Fabricant:: Wurth Elektronik

Wurth Elektronik 10 mH 2 A Common Mode Choke 85 mΩ 250V ac

Sous-total (1 plateau de 40 unités)*

213,36 €

(TVA exclue)

258,16 €

(TVA incluse)

Frais de livraison offerts pour toute commande de plus de 90,00 €

Temporairement en rupture de stock

40 unité(s) expédiée(s) à partir du 05 avril 2027

Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails

Unité	Prix par unité	le plateau*
40 +	5,334 €	213,36 €

*Prix donné à titre indicatif

N° de stock RS:: 185-7023
Référence fabricant:: 7448022010
Fabricant:: Wurth Elektronik

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	Wurth Elektronik
	Inductance	10mH
	Product Type	Common Mode Choke
	Maximum DC Current	2A
	Series	WE-CMBNC
	Core Material	Nano Crystal
	Packaging	Tray & Carton
	Test Frequency	10kHz
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	125°C
	Automotive Standard	No
	Choke Voltage	250V ac
	Mount Type	Through Hole
	Pin Count	4
	Inductance Tolerance	-30 → 50 %
	Height	22mm
	Depth	14mm
	Length	18mm
	Maximum DC Resistance	85mΩ
	Termination Style	Solder Pad
	Standards/Approvals	ENEC, RoHS, REACH, VDE

	Sélectionner tout
	Marque Wurth Elektronik
	Inductance 10mH
	Product Type Common Mode Choke
	Maximum DC Current 2A
	Series WE-CMBNC
	Core Material Nano Crystal
	Packaging Tray & Carton
	Test Frequency 10kHz
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature 125°C
	Automotive Standard No
	Choke Voltage 250V ac
	Mount Type Through Hole
	Pin Count 4
	Inductance Tolerance -30 → 50 %
	Height 22mm
	Depth 14mm
	Length 18mm
	Maximum DC Resistance 85mΩ
	Termination Style Solder Pad
	Standards/Approvals ENEC, RoHS, REACH, VDE

Pays d'origine :: CN

Wurth Elektronik WE-CMBNC Series Common Mode Choke, 10mH Inductance, 2A Maximum DC Current - 7448022010

This common mode choke is a through‑hole EMI suppression component designed for mains and signal‑line interference reduction in electronic assemblies. It uses a nanocrystalline core to provide magnetic coupling for differential noise attenuation while operating across a wide temperature range. The device is supplied in tray packaging with solder pad terminations and holds approvals that support use in regulated environments.

Features and Benefits:

• 10mH inductance reducing common‑mode noise levels
• 2A maximum DC current enabling moderate current handling
• 85mΩ maximum DCR minimising voltage drop and losses
• 250V AC choke voltage allowing line‑level applications
• -40°C to 125°C temperature range for elevated thermal endurance

Applications

• Suitable for EMI suppression on power input lines
• Ideal for industrial control interfaces requiring noise filtering
• Used with mains‑connected converters and power supplies
• Can be used for signal‑line interference mitigation in equipment
• Suitable for assemblies needing tray‑packaged components

What core material is used and how does it affect performance?

The component employs a nanocrystalline core which provides high permeability for effective common‑mode attenuation at the specified test frequency.

What test conditions define the stated inductance?

Inductance is measured at a test frequency of 10kHz, with a tolerance range of -30 to +50% around the nominal value.

How is the component mounted and terminated on the board?

It is a through‑hole device with four pins and solder pad termination intended for wave or manual soldering processes.

What approvals support use in regulated environments?

It holds ENEC, RoHS, REACH and VDE approvals indicating conformity with applicable safety and material restrictions.

How are size and packaging conveyed for handling and storage?

Physical envelope dimensions are 18mm length, 14mm depth and 22mm height, and units are supplied in tray and carton packaging.