Renesas Electronics 2305-1HDCGI Clock Buffer 8-Pin SOIC

Voir l’ensemble des Clock Buffers
Actuellement indisponible
Nous ne savons pas si cet article sera de nouveau disponible. RS a l'intention de le retirer de son assortiment sous peu.
Options de conditionnement :
N° de stock RS:
217-7816
Référence fabricant:
2305-1HDCGI
Fabricant:
Renesas Electronics
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Renesas Electronics

Product Type

Clock Buffer

Maximum Input Frequency

133MHz

Maximum Propagation Delay Time

250ps

Mount Type

Surface

Package Type

SOIC

Pin Count

8

Number of Outputs

5

Minimum Supply Voltage

3V

Maximum Supply Voltage

3.6V

Minimum Operating Temperature

0°C

Maximum Operating Temperature

70°C

Series

2305-1HDCGI

Length

5mm

Standards/Approvals

No

Width

4 mm

Height

1.75mm

Automotive Standard

No

The Renesas Electronics 2305 is a low phase noise, high-speed PLL based, low-skew zero delay buffer. Based on IDT's proprietary low jitter Phase Locked Loop (PLL) techniques, the device provides four low skew outputs at speeds up to 133 MHz at 3.3 V. The outputs can be generated from the PLL (for zero delay), or directly from the input (for testing), and can be set to tri-state mode or to stop at a low level. The PLL feedback is on-chip and is obtained from the CLKOUT pad. The 2305 is available in two different versions. The 2305-1 is the base part. The 2305-1H is a high drive version with faster rise and fall times.

Clock outputs from 10 to 133 MHz

Zero input-output delay

Four low skew (<250 ps) outputs

Device-to-device skew <700 ps

Full CMOS outputs with 25 mA output drive capability at TTL levels

5 V tolerant CLKIN

Liens connexes

Recently viewed