RS PRO IEK10N Clamp Meter 300 A 600 V dc 250 V ac CAT II, CAT III, UKAS

N° de stock RS:: 124-2001
Fabricant:: RS PRO

RS PRO IEK10N Clamp Meter 300 A 600 V dc 250 V ac CAT II, CAT III, UKAS

Actuellement indisponible

Désolés, nous ne savons pas quand ce produit sera réapprovisionné.

N° de stock RS:: 124-2001
Fabricant:: RS PRO

Spécifications

Documentation technique

Législations et de normes

Détails du produit

Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.

Sélectionner tout	Attribut	Valeur
	Marque	RS PRO
	Product Type	Clamp Meter
	Resistance Resolution	100mΩ
	Maximum AC Voltage Measurement	250V ac
	Maximum DC Voltage Measurement	600V dc
	Maximum Resistance Measurement	30MΩ
	Model Number	IEK10N
	Maximum Jaw Opening	29mm
	Minimum Operating Temperature	0°C
	Resistance Measurement Accuracy	±3 % rdg + 5 Digits
	AC Current Resolution	30mA
	AC Voltage Resolution	1mV ac
	AC Voltage Accuracy	±1.7% + 5 Digits
	Clamp Meter Type	AC Current Clamp Meter
	AC Current Accuracy	±1.9 % rdg + 0.5 A
	DC Voltage Accuracy	±0.7 % rdg + 2 Digits
	DC Voltage Resolution	100 V dc
	Maximum Operating Temperature	50°C
	Weight	112g
	Height	24mm
	Standards/Approvals	IEC 1010-1
	Width	42mm
	Length	145mm
	Functions Measured	Continuity, Resistance, Diode, AC Voltage, AC Current, DC Voltage
	Power Source	Battery
	Maximum Conductor Size	29mm
	Maximum AC Current Measurement	300A
	Calibrated	UKAS
	Safety Category Voltage	300V, 600V
	Safety Category Level	CAT II, CAT III
	Battery Life	800h
	Display Type	LCD
	Battery Type	AAA

	Sélectionner tout
	Marque RS PRO
	Product Type Clamp Meter
	Resistance Resolution 100mΩ
	Maximum AC Voltage Measurement 250V ac
	Maximum DC Voltage Measurement 600V dc
	Maximum Resistance Measurement 30MΩ
	Model Number IEK10N
	Maximum Jaw Opening 29mm
	Minimum Operating Temperature 0°C
	Resistance Measurement Accuracy ±3 % rdg + 5 Digits
	AC Current Resolution 30mA
	AC Voltage Resolution 1mV ac
	AC Voltage Accuracy ±1.7% + 5 Digits
	Clamp Meter Type AC Current Clamp Meter
	AC Current Accuracy ±1.9 % rdg + 0.5 A
	DC Voltage Accuracy ±0.7 % rdg + 2 Digits
	DC Voltage Resolution 100 V dc
	Maximum Operating Temperature 50°C
	Weight 112g
	Height 24mm
	Standards/Approvals IEC 1010-1
	Width 42mm
	Length 145mm
	Functions Measured Continuity, Resistance, Diode, AC Voltage, AC Current, DC Voltage
	Power Source Battery
	Maximum Conductor Size 29mm
	Maximum AC Current Measurement 300A
	Calibrated UKAS
	Safety Category Voltage 300V, 600V
	Safety Category Level CAT II, CAT III
	Battery Life 800h
	Display Type LCD
	Battery Type AAA

Pays d'origine :: TW

RS PRO IEK10N AC Current Clamp Meter, Max Current 300 A AC, CAT II 600 V, CAT III 300 V

This RS PRO IEK10N N digital clamp multimeter is a reliable diagnostic tool measuring AC current, AC and DC voltage, resistance as well as continuity. You can use it to measure cable or other conductors at any point in your electrical system without needing to cut into the wire or shut off the current in your circuit.

The meter is a great choice when you need to easily diagnose problems with your existing electrical circuits as well as when testing new troubleshooting new installations. It's also a handy device you can use to perform periodic maintenance tasks and troubleshoot your application more easily.

The device features a well-visible digital display with a data hold option. It's supplied with a current adapter, test lead set and soft case, meaning it's ready to use. It conforms to the CAT II 600 V, CAT III 300 V categories, so you can be sure it's safe to use.

Features and Benefits

• Multimeter and clamp accessory type

• Battery life of 800 h

• Battery type of AAA

• AC current clamp meter type

• Dimensions of 145 x 42 x 24 mm

• LCD type

• Resistance functions measured of AC current, AC voltage, continuity, DC voltage and diode test

• Jaw capacity (busbars) of 29 mm

• Maximum conductor size of 29 mm

• Operating temperature range of 0°C to +50°C

• Safety category voltage of CAT II 600 V and CAT III 300 V

• Weight of 112 g

RS PRO IEK10N Clamp Meter 300 A 600 V dc 250 V ac CAT II, CAT III, UKAS

RS PRO IEK10N AC Current Clamp Meter, Max Current 300 A AC, CAT II 600 V, CAT III 300 V

Features and Benefits

Liens connexes

Soyez le/la premier·ère à être informé de nos nouveautés produits et de nos offres spéciales.