Metrix MX 355 Clamp Meter, 400 A 400 A 600 V dc 600 V ac CAT III UKAS

Sous-total (1 unité)*

326,00 €

(TVA exclue)

394,46 €

(TVA incluse)

Add to Basket
sélectionner ou taper la quantité
En stock
  • 22 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
  • Plus 10 unité(s) expédiée(s) à partir du 20 mai 2026
  • Plus 11 unité(s) expédiée(s) à partir du 17 juin 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité
Prix par unité
1 +326,00 €

*Prix donné à titre indicatif

N° de stock RS:
192-5777
Référence fabricant:
MX0355-Z
Fabricant:
Metrix
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout

Marque

Metrix

Product Type

Clamp Meter

Maximum DC Current Measurement

400A

Resistance Resolution

0.1Ω

Maximum AC Voltage Measurement

600V ac

Maximum DC Voltage Measurement

600V dc

Model Number

MX 355

DC Voltage Resolution

100 mV dc

DC Voltage Accuracy

±1 % rdg + 3 Digits

Maximum Jaw Opening

30mm

Clamp Meter Type

AC/DC Clamp Meter

Resistance Measurement Accuracy

±1 % rdg + 2 Digits

AC Current Accuracy

±1.9 % rdg + 5 Digits

AC Current Resolution

10mA

Minimum Operating Temperature

0°C

AC Voltage Accuracy

±1.9 % rdg + 5 Digits

AC Voltage Resolution

100mV ac

DC Current Resolution

10mA

DC Current Accuracy

±2.5 % rdg + 10 Digits

Maximum Operating Temperature

40°C

Height

36mm

Length

199mm

Width

75mm

Weight

243g

Standards/Approvals

RoHS

True RMS

Yes

Functions Measured

DC Current, Frequency, AC Current, DC Voltage, Resistance, AC Voltage

Calibrated

UKAS

Battery Type

AAA

Maximum AC Current Measurement

400A

Battery Life

40h

Safety Category Level

CAT III

Safety Category Voltage

600V

Power Source

Battery

Non-Contact Voltage Detector

No

Maximum Conductor Size

30mm

Display Type

LCD

Statut RoHS : Exempté

Pays d'origine :
GB

Pocket clamp multimeters MX 350 and MX 355


Clamp-on ammeters for data acquisition.

Ergonomic, with 6000 count display, to measure voltage and AC and DC currents.

The hold function holds the measured value in difficult access or low-light conditions for analysis at a later time.

Combines different functions:multimeter, voltage and AC current measurement, ohmmeter and continuity testing.

The MX355's Δ Zero function allows the Zero dc to be automatically set, and can also be used for differential measurements.

Supplied with two batteries, a set of test leads and a carry case.

Available in calibrated version.

Approvals

  IEC 61010-1 and IEC 61010-2-032 Cat. III, 300 V - Cat. II, 600 V

Liens connexes