Igus 15 Black, W36mm x D24 mm, L1000.00 mm, 48 mm Min. Bend Radius, Igumid GLW
- N° de stock RS:
- 185-2809
- Référence fabricant:
- 15.025.048.0
- Fabricant:
- Igus
Sous-total (1 unité)*
55,32 €
(TVA exclue)
66,94 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 2 unité(s) prête(s) à être expédiée(s)
- Plus 22 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 1 unité(s) expédiée(s) à partir du 21 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 55,32 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 185-2809
- Référence fabricant:
- 15.025.048.0
- Fabricant:
- Igus
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Igus | |
| Width | 36mm | |
| Product Type | Cable Trunking | |
| Depth | 24mm | |
| Colour | Black | |
| Material | Igumid GLW | |
| Length | 1m | |
| Minimum Bend Radius | 48mm | |
| Fire Behaviour | Self-Extinguishing, Flame Retardant | |
| Series | 15 | |
| Integrated Strain Relief | Yes | |
| Standards/Approvals | REACH, RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque Igus | ||
Width 36mm | ||
Product Type Cable Trunking | ||
Depth 24mm | ||
Colour Black | ||
Material Igumid GLW | ||
Length 1m | ||
Minimum Bend Radius 48mm | ||
Fire Behaviour Self-Extinguishing, Flame Retardant | ||
Series 15 | ||
Integrated Strain Relief Yes | ||
Standards/Approvals REACH, RoHS | ||
- Pays d'origine :
- DE
Igus igubal Series Bearing Unit, 20mm Inside Diameter, 5500N Static Load Rating - EFOM-20
This bearing unit is a self-aligning support designed for rotating shafts in automation and mechanical assemblies. It provides a housed bearing solution that simplifies installation and compensates for minor misalignment, making it suitable for continuous operation in industrial equipment where straightforward mounting and dependable shaft support are required.
Features and Benefits:
• Inside bore 20mm delivers direct integration with standard shaft sizes
• Static load capacity 5500N supports substantial stationary forces
• Two mounting holes permit secure attachment and stable operation
• Mount hole spacing 69.1mm aligns with common fixture patterns
• Mount holes sized 8.4mm accept standard metric fasteners
• Manufactured from Igumid G material for wear-resistant contact surfaces
• Static load capacity 5500N supports substantial stationary forces
• Two mounting holes permit secure attachment and stable operation
• Mount hole spacing 69.1mm aligns with common fixture patterns
• Mount holes sized 8.4mm accept standard metric fasteners
• Manufactured from Igumid G material for wear-resistant contact surfaces
Applications
• Suitable for conveyor shaft support in manufacturing lines
• Ideal for actuator and drive assemblies in automation systems
• Used with rotary stages in electronic assembly equipment
• Can be used for motor shaft bearing support in electrical enclosures
• Ideal for actuator and drive assemblies in automation systems
• Used with rotary stages in electronic assembly equipment
• Can be used for motor shaft bearing support in electrical enclosures
What mounting footprint is required for fitting?
The unit requires a centre-to-centre hole spacing of 69.1mm with two holes sized for 8.4mm fasteners to secure it to a mounting surface.
Which shaft diameter will fit without additional adapting?
A 20mm shaft can be installed directly into the internal bore without the need for inserts or adaptors.
How does the material choice affect contact performance?
The Igumid G construction offers a polymer contact surface that reduces friction and withstands sliding wear in bearing interfaces.
How compact is the unit for space-constrained assemblies?
The housing measures 89mm in width and 46.5mm in length with a depth of 20 mm, allowing installation where lateral space is limited.
What static loads can the support resist when stationary?
It is rated to carry a static load of 5500 N, suitable for applications with significant non-rotational forces.