Igus 15 Black, W36mm x D24 mm, L1000.00 mm, 38 mm Min. Bend Radius, Igumid GLW
- N° de stock RS:
- 185-2808
- Référence fabricant:
- 15.025.038.0
- Fabricant:
- Igus
Sous-total (1 unité)*
55,32 €
(TVA exclue)
66,94 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- 6 unité(s) prête(s) à être expédiée(s) d'un autre centre de distribution
- Plus 12 unité(s) expédiée(s) à partir du 03 août 2026
- Plus 12 unité(s) expédiée(s) à partir du 28 août 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 55,32 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 185-2808
- Référence fabricant:
- 15.025.038.0
- Fabricant:
- Igus
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Igus | |
| Product Type | Cable Trunking | |
| Width | 36mm | |
| Depth | 24mm | |
| Colour | Black | |
| Material | Igumid GLW | |
| Length | 1m | |
| Minimum Bend Radius | 38mm | |
| Fire Behaviour | Self-Extinguishing, Flame Retardant | |
| Series | 15 | |
| Integrated Strain Relief | Yes | |
| Standards/Approvals | REACH, RoHS | |
| Sélectionner tout | ||
|---|---|---|
Marque Igus | ||
Product Type Cable Trunking | ||
Width 36mm | ||
Depth 24mm | ||
Colour Black | ||
Material Igumid GLW | ||
Length 1m | ||
Minimum Bend Radius 38mm | ||
Fire Behaviour Self-Extinguishing, Flame Retardant | ||
Series 15 | ||
Integrated Strain Relief Yes | ||
Standards/Approvals REACH, RoHS | ||
- Pays d'origine :
- DE
Igus igubal Series Spherical Bearing, 8mm Bore Size, 2.7kN Radial Load Rating - KGLM-08
This spherical bearing provides a self-lubricating pivot interface designed for applications requiring angular misalignment accommodation and smooth rotational movement. It is intended for industrial environments where compact, low-maintenance bearing solutions are needed, offering a durable polymer construction suitable for repeated motion and alignment tolerance in automation and mechanical systems.
Features and Benefits:
• 8mm bore for secure shaft engagement and easy installation
• 19mm outside diameter for compact assembly integration
• 12mm width to suit constrained axial spaces
• 1.2kN axial static capacity to manage thrust loads
• 2.7kN radial static capacity for high radial loading
• Made from igumid G material providing self-lubricating performance
• 19mm outside diameter for compact assembly integration
• 12mm width to suit constrained axial spaces
• 1.2kN axial static capacity to manage thrust loads
• 2.7kN radial static capacity for high radial loading
• Made from igumid G material providing self-lubricating performance
Applications
• Suitable for linkage joints in automation equipment where misalignment occurs
• Ideal for pivot points in electronic actuator assemblies
• Used with guide shafts in electrical panel mechanical systems
• Can be used for small machine tool trunnions requiring low-maintenance bearings
• Ideal for pivot points in electronic actuator assemblies
• Used with guide shafts in electrical panel mechanical systems
• Can be used for small machine tool trunnions requiring low-maintenance bearings
How does the bearing cope with shaft misalignment during operation?
The spherical internal geometry permits angular movement between shaft and housing, reducing stress from misalignment without external lubrication.
What maintenance regime is needed for long-term service?
The igumid G composition provides built-in lubrication, minimising the need for re-lubrication and reducing scheduled maintenance tasks.
Can it replace a metal plain bearing in compact designs?
Its polymer construction and specified outer diameter allow substitution where space is limited and reduced friction is required, provided static load limits are observed.
What should be considered when selecting for load-bearing joints?
Ensure axial and radial static capacities match or exceed applied peak loads and verify shaft fitment to the 8mm bore for correct load distribution.