Milwaukee High Cut Grey HPPE, Nitrile, Nylon, Spandex Work Gloves, Size 11, Nitrile Coating
- N° de stock RS:
- 269-4456
- Référence fabricant:
- 4932492044
- Fabricant:
- Milwaukee
Sous-total (1 unité)*
35,56 €
(TVA exclue)
43,03 €
(TVA incluse)
Frais de livraison offerts pour toute commande de plus de 90,00 €
En stock
- Plus 3 unité(s) expédiée(s) à partir du 11 novembre 2026
Besoin de plus? Cliquez sur " Vérifier les dates de livraison " pour plus de détails
Unité | Prix par unité |
|---|---|
| 1 + | 35,56 € |
*Prix donné à titre indicatif
- N° de stock RS:
- 269-4456
- Référence fabricant:
- 4932492044
- Fabricant:
- Milwaukee
Spécifications
Documentation technique
Législations et de normes
Détails du produit
Recherchez des produits similaires en sélectionnant un ou plusieurs attributs.
Sélectionner tout | Attribut | Valeur |
|---|---|---|
| Marque | Milwaukee | |
| Size | 11 | |
| Product Type | Work Gloves | |
| Material | HPPE, Nitrile, Nylon, Spandex | |
| Colour | Grey | |
| EN 388 Abrasion | 4 | |
| EN 388 Tear | 4 | |
| EN 388 Puncture | 3 | |
| EN 388 Blade | Yes | |
| EN388 Cut - TDM-100 Test | F | |
| EN388 Cut - Coup Test | X | |
| Safety Standard | EN 388:2016, EN ISO 21420 | |
| Series | High Cut | |
| Number of Gloves | 2 | |
| Coating | Nitrile | |
| Resistance Features | Abrasion Resistant, Cut Resistant, Puncture Resistant, Tear Resistant | |
| Standards/Approvals | EN388:2016 (4X43F), EN ISO 21420 | |
| EN 374 Chemical | No | |
| EN 407 Thermal | No | |
| EN 511 Cold | No | |
| Sélectionner tout | ||
|---|---|---|
Marque Milwaukee | ||
Size 11 | ||
Product Type Work Gloves | ||
Material HPPE, Nitrile, Nylon, Spandex | ||
Colour Grey | ||
EN 388 Abrasion 4 | ||
EN 388 Tear 4 | ||
EN 388 Puncture 3 | ||
EN 388 Blade Yes | ||
EN388 Cut - TDM-100 Test F | ||
EN388 Cut - Coup Test X | ||
Safety Standard EN 388:2016, EN ISO 21420 | ||
Series High Cut | ||
Number of Gloves 2 | ||
Coating Nitrile | ||
Resistance Features Abrasion Resistant, Cut Resistant, Puncture Resistant, Tear Resistant | ||
Standards/Approvals EN388:2016 (4X43F), EN ISO 21420 | ||
EN 374 Chemical No | ||
EN 407 Thermal No | ||
EN 511 Cold No | ||
Statut RoHS : Exempté
- Pays d'origine :
- CN
Milwaukee Work Gloves, Grey, Cut Resistance Level - 4932492044
This work glove product provides hand protection for industrial tasks where cut, abrasion, puncture and tear hazards are present. Designed for technicians in automation, electronics, electrical and mechanical fields, it combines reinforced fibreglass and tungsten elements with lightweight textiles to allow precise handling while reducing mechanical risk in routine and maintenance operations.
Features & Benefits
• EN388 4X43F rated protection for severe cut resistance
• High-performance polyethylene core for reduced cut penetration
• Tungsten reinforcement improves abrasion resistance and lifespan
• Nylon and spandex Shell for lightweight dexterity and fit
• SMARTSWIPE™ compatible fingertip functionality for touchscreens
• Washable up to 3 times to extend usable service life
• High-performance polyethylene core for reduced cut penetration
• Tungsten reinforcement improves abrasion resistance and lifespan
• Nylon and spandex Shell for lightweight dexterity and fit
• SMARTSWIPE™ compatible fingertip functionality for touchscreens
• Washable up to 3 times to extend usable service life
**Applications**
• Suitable for handling Sharp sheet metal and punched components
• Ideal for assembly of electronic modules requiring fine dexterity
• Used for cable installation and electrical panel maintenance
• Can be used for mechanical workshop tasks with Sharp edges
• Suitable for inspection and calibration work on automation lines
• Ideal for assembly of electronic modules requiring fine dexterity
• Used for cable installation and electrical panel maintenance
• Can be used for mechanical workshop tasks with Sharp edges
• Suitable for inspection and calibration work on automation lines
How should these gloves be stored between uses?
Keep them in their original packaging in clean, ventilated premises at -5°C to 35°C and 20%–75% humidity.
What laundering limits apply to these gloves?
Normal wash process only, maximum temperature 40°C
do not bleach, iron, tumble-dry or dry-clean.
Are there limitations around machine use while wearing them?
Do not wear near rotating or moving machine parts due to entanglement risk if caught.
What is the expected shelf and in-use lifetime?
They may be used up to 5 years after production and should be used within 3 years of purchase
in-use life depends on wear and abrasion.
Which materials provide puncture and tear resistance?
A combination of fibreglass, HPPE and steel/tungsten elements provides resistance to puncture and tearing while maintaining mobility.
Liens connexes
- Milwaukee High Cut Grey HPPE Nylon Size 7, Nitrile Coating
- Milwaukee High Cut Grey HPPE Nylon Size 8, Nitrile Coating
- Milwaukee High Cut Grey HPPE Nylon Size 9, Nitrile Coating
- Milwaukee Hi-Dex Black HPPE Nylon Spandex Work Gloves L, Nitrile
- Milwaukee Hi-Dex Black HPPE Nylon Spandex Work Gloves S, Nitrile
- Milwaukee Hi-Dex Black HPPE Nylon Spandex Work Gloves M, Nitrile
- Ansell HyFlex 11-571 Black HPPE HPPE Nylon Spandex Size 7, Nitrile
- Ansell HyFlex 11-571 Black HPPE HPPE Nylon Spandex Size 9, Nitrile